Results 1 to 6 of 6
  1. #1
    Member Array
    Join Date
    Mar 2010
    Location
    Sydney
    Car:
    06 CL9 Lux

    Euro Shakes idling on Drive.

    My euro shakes when I'm idling on drive, no acceleration. I can also feel it when brake is lightly applied when stuck in traffic i.e. the brake is very lightly applied that the car still moves forward in traffic. It feels like the car is going to stall...felt more when its up hill. It is possibly the torque convertor?
    I took it to honda and they said they supposedly 'found' the problem and said the rear engine mount was sagging/weakened so they replaced it.

    But it still has the problem!! Any ideas? Anyone experience this before?

    automatic btw

  2. #2
    Member Array
    Join Date
    Sep 2004
    Location
    Darwin
    Car:
    Lexus IS-F
    Did they change the gearbox oil at service? How long has it been since the service?
    Honda Accord Euro CU2 / Lexus IS-F

  3. #3
    Member Array
    Join Date
    Jun 2010
    Location
    Melbourne
    Car:
    Accord Euro 03
    Does it happen worse when your aircon is on

  4. #4
    Member Array
    Join Date
    Jan 2011
    Location
    Adelaide - HondaDynamiks
    Car:
    CD5 x2
    I've had this problem with seized Vtec rocker arm pins. Normally occurs at idle and when slowly taking off slowly.. Had to remove and dismantle the rocker gear and clean all the Vtec rocker arm pins. Normally happens from lack of servicing. (oil changes)
    However torque convertor shudder Is very common with cl9s.
    Torque convertor shudder is normally more noticeable when slowly accelerating between around 40-60 km/h

    Good luck with it all.
    hondadynamiks - ADELAIDE

  5. #5
    Member Array
    Join Date
    Mar 2010
    Location
    Sydney
    Car:
    06 CL9 Lux
    Did they change the gearbox oil at service? How long has it been since the service?

    - nope, last service was 52,000. its 55,000 atm

    Does it happen worse when your aircon is on
    - Im not sure , I havent tried with the aircon on, i'll try it

  6. #6
    Member Array
    Join Date
    Mar 2010
    Location
    Sydney
    Car:
    06 CL9 Lux
    Quote Originally Posted by HONTUNE View Post
    I've had this problem with seized Vtec rocker arm pins. Normally occurs at idle and when slowly taking off slowly.. Had to remove and dismantle the rocker gear and clean all the Vtec rocker arm pins. Normally happens from lack of servicing. (oil changes)
    However torque convertor shudder Is very common with cl9s.
    Torque convertor shudder is normally more noticeable when slowly accelerating between around 40-60 km/h

    Good luck with it all.
    Ok I'll let honda know about that, cars still under warranty till end of the month !

    Thanks for your responses, Ill let you guys know what happens.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.