DIY Stock EK LIfters

[viinnh]

only the 2 front bolts (closer to the front of the car) are bolted down. the other bolts are with the spacers on the stud and sits on top of the hole to prevent water from getting in

[kiaa_]

Probably going to give this a go tomorrow

[VIP-EK]

Gave it a go today. Turned out pre good

[eren]

Too easy lol =)

[Adamjoeldavis]

what size washers? 1/4''? and stupid question but does doing this reduces the clearance when you open the hatch/boot?

[VIP-EK]

what size washers? 1/4''? and stupid question but does doing this reduces the clearance when you open the hatch/boot?

Use what ever washers, doesn't even need to be washer. I just threw on some bolts over it then put the original bolts over it.

[viinnh]

use anything you want doesnt matter. and no does not reduce any clearance

http://www.ozhonda.com/forum/showthr...9-Wing-lifters

here is a DIY i made for EK9

[iceey]

Done it to mine .. Great DIY mod man thnx

[Chalabi]

Need parts for my ek please see thread

[jprak]

Need parts for my ek please see thread

stopped hijacking this thread. if you want to promote, bump your thread