Is this a Jap-Spec s2000 ?

**tamay_s2k** · 03-01-2012 10:56 AM

Originally Posted by AusS2000

Really? What size are the new brake discs?

1999 - 2003
Diameter: 300mm
Original Height: 40mm
Original Thickness: 25mm
Minimum Thickness: 23mm
Centre Hole Diameter: 300mm

2004 +
Diameter: 282mm
Original Height: 47mm
Original Thickness: 23mm
Minimum Thickness: 21mm
Centre Hole Diameter: 282mm

i foudn this out wen i was ordering my brakes through my mates shop and his a RDA dealer. There was a note on his system saying to make sure u get the suitable model because the 2 models are different and provided the actual dimensions between the 2 models and there factory specs

**tamay_s2k** · 03-01-2012 10:59 AM

Originally Posted by AusS2000

Ok, you supply me a pic of the VIN no. with AP2 and the Aus character code and I will admit defeat.

ill get back 2 u on that 2day :P
i hope im right lmaoo :P

**AusS2000** · 03-01-2012 11:00 AM

Ok, so you're assuming the front bumper is different because a dodgey ebay sourced knock off took some work to fit?

**AusS2000** · 03-01-2012 11:02 AM

Originally Posted by tamay_s2k

1999 - 2003
i foudn this out wen i was ordering my brakes through my mates shop and his a RDA dealer.

Ok, so you too, you are relying on online information from a third party to ascertain differences between S2000 models.

I really don't know why I bother with OzHonda.

**troys2000** · 03-01-2012 11:04 AM

Lol thanks Aus2000. We measured the length with string over my front end and it was slightly shorter as well. (didnt want to go into too much detail)
For sure Jap spec. Not sure why I can do 190 but. Got a new engine but am sure is still a jap spec engine too and i didn’t change the computer either

**tamay_s2k** · 03-01-2012 11:21 AM

Originally Posted by AusS2000

Ok, so you too, you are relying on online information from a third party to ascertain differences between S2000 models.

I really don't know why I bother with OzHonda.

lol not really, as wen i ordered mine, a mate also ordered for his ap2 and we did a comparison on the disks and they actually were different sizes, explain that now mr honda god =-
and where do you get ur info from mr internet mechanic...u seem to no a lot about hondas LOL

**AusS2000** · 03-01-2012 11:28 AM

Originally Posted by tamay_s2k

explain that now mr honda god =-
and where do you get ur info from mr internet mechanic...u seem to no a lot about hondas LOL

Just because RDA list different sizes on their website and supposedly send out different sizes when you order them doesn't mean that Honda made different sizes.

I know very little about Hondas, but quite a bit about S2000s from having owned and worked on one for over a decade, and also my involvement with S2ki. In fact I remember a thread where someone mentioned the different size rotors as listed on the RDA website and it was immediately shot down.