H22 Turbo setup.

[defect]

Maybe next mod would be a H2B conversion steve?

dont think B series box fits into a prelude chassis, the amount of work that would be required, custom link, mounts. The set up doesnt exist for a reason.

he's problem is the turbo is way too small for the motor, turbo honda's like big rear housings.

he's gears isn't the problem either, longer gears is suppose to be better for turbo, and even if he wanted shorter gears, a mFactory 4.6 FD would be better option than your opinion.

[ThePacman]

dont think B series box fits into a prelude chassis, the amount of work that would be required, custom link, mounts. The set up doesnt exist for a reason.

he's problem is the turbo is way too small for the motor, turbo honda's like big rear housings.

he's gears isn't the problem either, longer gears is suppose to be better for turbo, and even if he wanted shorter gears, a mFactory 4.6 FD would be better option than your opinion.

Yeah, No need for a diferent box. the stock ratios are fine for a turbo motor.
I don't thing the turbine is too small for the H22. notconsidering i'm not chasing over 200kw at any stage. it's a t28 with an A/R of .86. just gotta fix the exhaust..

[ThePacman]

Also check your icm its common for the miss to happen once car is warm to develop a miss as these fail quite often

nOOb time for me.... icm....??

[mooshie]

Ignition Control Module

http://autorepair.about.com/library/a/1e/bl446e.htm

[ThePacman]

Entire new dizzy went in today..... Problem still exists....!

[Scholzey]

its not lean is it?

do you have the o2 sensor hooked up??

[ThePacman]

No, it's not lean. Not according to the sure fuel gauge, or the datalog...

Whats more, it's done it again. Started it saturday, it started for 1 second, then cut out. Now won't start again.

I'm assuming that it's done the ignition module again.

Kinda frustrated....!

[ThePacman]

I know it has nothing to do with the turbo setup.
But here is todays effort....

[ThePacman]

Exhaust.....




This pic shows the new mufflers. they still had the the reducers in at this point. Which I have since taken out, for audable orgasms...


Big "THANKS A HEAP" to Simon from Exhotic Exhausts. First class service and first class work....
I'm very impressed...... Very HAPPY.....!!!!

Also, I'm about to throw a GT28r on instead of the 28/25...

Here is a pic of the compressors for comparison....


This is also a garrett ball bearing turbo as most will already know. so this should go in well....

[Sexc86]

lookin good steve, i see your enjoying holidays

[ThePacman]

Dramas Dramas Dramas.
End result is, I've bought a new turbo. I'll be fitting it tomorrow.
It's a Garrett GT28r with a .86 rear housing.
As pictured.....



Already picked up.....!

[CRXDEL501]

Sweet !

Love the exhaust

I got mine done there ! I love Simons stainless steel work

The welds were awesome !