Page 1 of 5 1234 ... LastLast
Results 1 to 12 of 57
  1. #1
    Member Array
    Join Date
    Jan 2012
    Location
    Melbourne
    Car:
    Eg Civic

    New Civic Owner EG with a B18

    Hi Guys.

    Ive moved to the darkside and become a Honda owner . I needed a new daily after the christmas hail destroyed my daily(s) So i decided on buying a Civic with a B18 conversion. I looked high and low for one until i found Mango's civic forsale. After a quick inspection that same day i decided id have it. 2 days later it was mine.

    so. heres what its got.

    Honda 1995 Civic EG GLI Special Edition

    Engine:
    Integra VTIR B18C2 (cam seals, rocker cover seal, larger head gasket, water pump, timing belt, rear main seal,spark plugs, clutch, machined fly, pressure plate changed before drop in)
    Exedy OEM Clutch
    Apexi Neo SAFC
    RMF style 4- 1 headers
    High flow cat with flexi pipe
    Mugen b pipe
    Varex muffler
    Engine damper
    Short ram with cold air duct
    3A pod
    Pivot grounding kit

    Exterior:
    OEM EG6 lip
    OEM EG6 visors
    Antenna block of plate
    Carbon Fiber Spoon Style Duck bill
    HID Headlights

    Suspensoin:
    BC BR coilovers
    ITR Brakes
    ITR 5 Stud Conversion
    ITR Sway Bar
    DC2R LCAs
    ASR Lower Brace

    Interior:
    Short Shift with Extended shifter
    ITR Shift Knob
    Alpine Headunit MP3/Ipod
    Fusion Speakers

    Plans:
    Drive the car as much as possible. The car was bought as my daily but to allow me to drive it everywhere (hills, tracks, street). Interior will be upgraded to better seats (I have a pair of Bride EuroII in my 180sx that i will be moving into this), new wheels will be purchased (currently looking at Enkei RPF01 in 15x7 +30). Car will be resprayed in the near future also. Plans are to make it as light as possible to squeeze as much power/responce out of it., i will also be removing the stock wheel and installing a quick release and my Nardi Deep Corn.

    Things ive purchased since buying the car:
    Camber arms front and rear
    Carbon fiber spoon style side mirrors
    Strut braces front and rear

    Couple of pre purchase pics, have since removed all stickers from the car.





    Last edited by Egxris; 23-01-2012 at 10:58 AM.

  2. #2
    Member Array
    Join Date
    Oct 2007
    Location
    liverpool
    Car:
    dc2+t [OHN 03Z]
    car looks good welcome!

    cant wait for updated pics
    coz stickers make my car go faster... right???
    I my RICED DC2

  3. #3
    Member Array
    Join Date
    Sep 2008
    Location
    Melbourne
    Car:
    Kermit K20A
    This looks like a civic I used to see kicking around Narre Warren all the time
    Kermit EGK20A
    Winton: 1:35.08
    Wakefield: 1:08.8

  4. #4
    Member Array
    Join Date
    Jan 2012
    Location
    Melbourne
    Car:
    Eg Civic
    Cheers guys

    Picking up a Nardi Deep Corn and Boss kit tonight for it
    If you thought my post was helpful please rate it!

    Primal Garage Blog - Paint Panel Performance

  5. #5
    Member Array
    Join Date
    Jan 2012
    Location
    Melbourne
    Car:
    Eg Civic
    Heres a close up of the engine bay

    Click image for larger version. 

Name:	vtec.jpg 
Views:	284 
Size:	69.7 KB 
ID:	20956
    If you thought my post was helpful please rate it!

    Primal Garage Blog - Paint Panel Performance

  6. #6
    Member Array
    Join Date
    Sep 2008
    Location
    Melbourne
    Car:
    Kermit K20A
    That exhaust manifold looks sex
    Kermit EGK20A
    Winton: 1:35.08
    Wakefield: 1:08.8

  7. #7
    Member Array
    Join Date
    Nov 2011
    Location
    NSW
    Car:
    DC2 Integra
    Engine looks sexy along with those stainless steel headers..
    wish mine would looks so clean ..!

  8. #8
    Banned Array
    Join Date
    Mar 2010
    Location
    SE Melbourne
    Car:
    [|-|]
    Nice pick up..what colour you plan on spraying it?

  9. #9
    Member Array
    Join Date
    Jan 2012
    Location
    Melbourne
    Car:
    Eg Civic
    Looking at painting the car Holden Alto Grey



    Picked up a Nardi Deep Corn and Boss Kit off the forums a couple of days ago. So installed them and my Nardi Peddles i bought 3 years ago, Also relocated the SAFC




    Lastnight i also made another purchase, OEM Cup holder for the center console. Since buying the car ive been pissed off each time i drive it with a drink/coffee now thats that problem solved :twisted:



    If you thought my post was helpful please rate it!

    Primal Garage Blog - Paint Panel Performance

  10. #10
    Member Array
    Join Date
    Jan 2012
    Location
    Melbourne
    Car:
    Eg Civic
    Need....to....stop....buying....parts....for....ci vic......


    just purchased a ITR Shift Boot. Red stitching will match the Nardi.

    If you thought my post was helpful please rate it!

    Primal Garage Blog - Paint Panel Performance

  11. #11
    Member Array
    Join Date
    Sep 2008
    Location
    Melbourne
    Car:
    Kermit K20A
    ^ good luck mate. Once the bug bites, it's hard to heal
    Kermit EGK20A
    Winton: 1:35.08
    Wakefield: 1:08.8

  12. #12
    Member Array
    Join Date
    Jan 2012
    Location
    Melbourne
    Car:
    Eg Civic
    Things are just so cheap for these cars lol.
    If you thought my post was helpful please rate it!

    Primal Garage Blog - Paint Panel Performance

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.