FRONT
LEFT = | grey-black line | Blue
RIGHT = brown-black line | Red-Green
REAR
LEFT= | grey-white line | blue-yellow line
RIGHT = brown-white line | red-yellow line
Below are Power wires.
|BLACK| = Ground
|white-blue line| = Constant +pos Battery
|red-black line| = Not used.
|yellow-red line| = ACC Ignition
|yellow-black line | = Not used.
one of the NOT USED wires are the dimmer, cant remember which is which.
Use a DC light tester to figure out the power wires and use a AA battery to figure out the speaker wires and its location before you solder the wires in permanently.
Otherwise you can buy a stereo conversion harness from your autoshops - no need to splice, solder etc.
Bookmarks