I wet the car with a hose. Wash roof, boot, and hood with a sponge and auto glym car shampoo. Rinse off. Wash sides of car to the moldings next then rinse. Wash from moldings to side skirts next. Last of all the rims. This way you don't pick up road grime and scratch any upper surfaces.. Rinse again, then chamois dry. Hit it with Auto Glym high resin polish, finally Meguires Carruba wax twice job done
my cousins fiance owns zoom carwash on canterbury rd so i just take it down there and do it myself using his equipment takes about 5-10 minutes then the workers dry it and clean inside.
rinse section to be washed with hose; soap up with car shampoo; rinse and repeat for all panels. starting from roof > bottom. after all sections done, i use a chamois to dry it.
i do my alloys first, and wheel arches first.
i have been thinking of using a water blade as it seems like a lot faster way to dry the car.
rinse section to be washed with hose; soap up with car shampoo; rinse and repeat for all panels. starting from roof > bottom. after all sections done, i use a chamois to dry it.
i do my alloys first, and wheel arches first.
i have been thinking of using a water blade as it seems like a lot faster way to dry the car.
You should offload that chamois of yours as every other technique you have is 100%.
Think of a water blade, think of rubber dragging along your paint and unfortunately will mar your paint very quickly Waffle Weave Drying Towel or Microfibre Chamois!
thanks for the heads up. was thinking of opening a car detailing yard (operate from home) to supplement my income. since shifts at work are slow, and my personal project is slowing down.
thanks for the heads up. was thinking of opening a car detailing yard (operate from home) to supplement my income. since shifts at work are slow, and my personal project is slowing down.
consider attending a clinic for a bit more information and know how on the whole detailing thing. Great for the experienced or even inexperienced
I bought some Autoglym paint renovator. I was planning to remove the spider webs and craters I got in my paint.
I did it by hand, and there was little effect. I gave it a good whack. Then with the resin polish, extra gloss protection then wax.
Bookmarks