EK Civic Knocking Noise HELP!

[Mikecivic78]

could be many things

make sure your front suspension and associated bolts are torqued properly.

[dorikin]

hmmm, that had crossed my mind. Anyway to check it?

Just get someone to rock the engine back and forth while you look if shit comes out of the rubber mount

[Mikecivic78]

hmmm, that had crossed my mind. Anyway to check it?

just physically look at the mounts. Look for cracked or broken mounts.



your B16a's mounts differ slightly, but that's what pretty much they look like

[quang]

Awesome guys thanks heaps!!! Will check it out.

[Super-DA9]

how are those strut tower nuts? done up tight?

[quang]

Strut tower nuts done up tight

It is easy to change the engine mount??

[1900-hustler]

its kinda a pain in the ass

you will need a jack stand (big one) to hold the engine in place
chock it with a rubber block of wood if you dont have rubber

unless you good with the tools just take to mechanic..

[Mr Abzii]

Same thing happened to me last week. I took it to the mechanic to get checked out and had it run on the car hoist for several minutes, only to find 3 of my lug nuts from the front right wheel were missing. Sometimes its the things you least expect. Check it and make sure they are all there and torqued tight

[trism]

wut???

[viinnh]

****ing lool @ the lug nuts haha