[CL9] OEM Wire Harness [aftermarket headunit] - HELP!

[wammies]

Hey guys,

Just wondering if anyone knows what the OEM wire harness is supposed to look like.

Hoping guys that have aftermarket headunits installed would be able to help me out.

I'm trying to get the OEM headunit to work, coz the previous owner had an aftermarket headunit installed, but cut all the wires when he removed it and there's no sound output to any of the speakers, which were stripped too..


There seems to be a socket in which I can plug something in at the bottom of the OEM headunit, and ofcourse, the chopped wires.

P.S. The OEM headunit is functioning, just no audio output.

[Fredoops]

Try the accord euro subforum.

[marquee]

You will need to buy the full loom. Unless you can find q wrecked euro and cut the plug off and rewire.

[wammies]

hey guys, thanks for you comments

I ended up fixing it.

All I had to do was just disconnect the 'aftermarket headunit wire harness' and just plug the origin loom back in. Had to reconnect one of the wires coz it was cut.