Rear suspension bolts/nuts for dc2r

[slow_poke]

Wasnt sure where to place this.

Hey guys I am aiming to replace all bolts/ nuts on my whole rear end (suspension/subframe/lca/camber arms/ etc)
I am wondering if anyone has the details for each bolt size etc.

Any help would be really appreciated.
Thanks in advanced

[trism]

but why?

[slow_poke]

but why?

Just some bolts are threaded/ rounding and would just like to replace all.
Just want everything new that's all.

[trism]

First up, I'd try get them from Honda.

[slow_poke]

First up, I'd try get them from Honda.

I've been suggested to take all them out then take to a engineering shop and
Get them to replace them.

[senna]

This ^^^

Any suspension specific parts are usually exactly that, specified to a particular length, size and strength.

Try Honda first, next try and raid a wreckers for what you need

[crobaa]

An engineering shop will match any bolt/nut you bring in exactly. They will give you as strong a bolt if not stronger if you go to a proper shop. But the main reason I'd try them is because honda will probably charge alot. Wreckers is an ok idea aswell but its a bit of work for not much saving. Hopefully the threads are ok on the car.

[grifty]

Might help

http://www.hondaoriginalparts.com/ho...p?mod_01=19790

[mytfoz]

from memory you'll need 10mm 14mm and 17mm might need 12mm.
socket and spanner

remove them and take them to bolt specialist. best way to do it as u cant go wrong.
remove one side and take it to them.

[mocchi]

hey ari, get it from honda usa
much cheaper instead of honda au even with US shipping fees

inb4Tibolts

[mugen_ctr]

slight off topic, Anyone one know where to get longer bolts for LCA, same ones ASR kit has? the two long ass bolts, im missing one of em, an need it, and all bolt shops ive tried dont have it, and i mean 5 different shops