i have a 1994 honda integra vti b18c2 ok two days ago i washed my engine, after replacing the sparkplugs. ran fine for a day then yesterday i noticed it was misfiring at high revs. i thought it must be one of the leads as they were old. i drove it two the shops this morning and it was running ok cold once it heated it it was missing alot all the time. so when i got home i poped out the ignition leads and two of the spark plug wells were half full of water. the other two were dry. then my mate decided to undo the plugs and let the water into the cylinder telling me it would be pushed out of the exhaust.so we cleaned dryed of everything and now i cant get the car to start. not at all i also found a fuse out. in the engine bay 7.5 amp closest to the fire wall. replaced that and the abs light handbrake battery on the dash stays on even when the key is out of the car. does anyone have any ideas or anything i can do to get it started again im not sure if the two were linked or seperate problems. maby the ignition leads are bad. help
Bookmarks