-
ZC DOHC Performance Parts
Hey,
I have a D16A8, and I've just been looking for mods for it, and I'm finding them hard to find. Exhaust and Intake stuff isnt too hard to find, I've even found some Turbo stuff, but I dont want to go the turbo route. But I'm also trying to work out other options also. Theres plenty of stuff for other D-series motors but not much for this one. I went over to D-series.org and made a post but only got 1 reply.
If anyone knows of some parts that I can get, and where to get them from (even websites to look at) could you please post the info here. Im looking for anything, cheap and expensive, big or small.
Thanks.
-
u get get some cams and Valve Springs from here www.buy-efi.com bit expensive though
-
Hey thanks for the site, even though the parts on there say ZC DOHC Non-Vtec, they say for D16A1 and D16A9, would they still fit a D16A8? and also I always thought the D16A1 and D16A9 were SOHC.
-
cams ,bisimoto header , valve spring etc (www.exospeed.com)
also try an-r.com for header , jg engine dynamics have cams , cam gear etc for zc
if you want to get anr or bisi header , take your ac and maybe your ps out 1st.
anyway how much do u wanna spend?
-
I havent set any real price. Basically what I'm trying to do is see what I can get for what price. I'm even looking at non engine mods too, such as suspension and brakes, etc.
Thanks for the sites, but as I said before, most of these sites are showing up D16A1 parts, and ZC SOHC parts which I dont think will work with my DOHC ZC, but I dont know too much about this stuff so I'm probabaly wrong.
Thanks alot for the help so far, and I'll keep lookin.
-
D16a1 is USDM integra 86 -89 (first gen)
D16a3 us AUDM Integra 86 - 89 (first Gen)
D16a8 is Si civic
D16a9 crx
zc DOHC JDM - Integra 86 -89
all these engines are 1.6 DOHC 16 valve 4 banger. all can use same cams, just the timing will be out.
-
Originally Posted by euro86
D16a1 is USDM integra 86 -89 (first gen)
D16a3 us AUDM Integra 86 - 89 (first Gen)
D16a8 is Si civic
D16a9 crx
zc DOHC JDM - Integra 86 -89
all these engines are 1.6 DOHC 16 valve 4 banger. all can use same cams, just the timing will be out.
ahhh... the CRX is also a d16a8! unless i cant read???
d-series aint really the best place to go as its american (personl oppinion)
BTW this thread is a great help...i bin chasing down parts for ages!!
-
Originally Posted by euro86
D16a1 is USDM integra 86 -89 (first gen)
D16a3 us AUDM Integra 86 - 89 (first Gen)
D16a8 is Si civic
D16a9 crx
zc DOHC JDM - Integra 86 -89
all these engines are 1.6 DOHC 16 valve 4 banger. all can use same cams, just the timing will be out.
cool
wot about the specs of the honda concerto?
D16Z2 ??? they go hard as well i fink 88.26 flywheel kw.. SOHC engine ..goes harder than a newer D16Y4 with more mods ...e.g. custom filter/ pod cold air ... full exhaust 4-2-1 .. and FPR installed
while the D16Z2 only had direct cold air as pod is installed behind the bar .. 4-1 extractors ..and cat back exhaust ...
D16Z2 won..
-
[TNT] Team No Traction - Cos No Traction Is Underrated
Two turbos, is better then one.
-
CRX is actually the D16A6 I believe. An earlier version of the D16A8 with a slightly different ECU.
-
i might have them wrong... soz but yeah still cams, cam gears and springs should all fit thats if its a DOHC 1.6 no vtec D series. best place to go would prolly be d-series.org but i dunno
-
Originally Posted by wynode
CRX is actually the D16A6 I believe. An earlier version of the D16A8 with a slightly different ECU.
d16a8
maybe on some of the earlier ones (maybe 88 i dunno) but on all the +89's i've seen they have all been d16a8 unless they an SiR etc.
there isnt a hell of a lot u can do to them but boost them (nice option )
or swap them to b or k series.
also bud check out the crxaustralia forums at http://crxaustralia.hondata.com.au/c...ex.php?act=idx
the main site should be up soon ( http://www.crxaustralia.com )
www.lozzz.com - car spotting, food and other random crap from Japan
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks