Results 1 to 4 of 4
  1. #1

    Longer pedal shifters

    Does anyone know of an aftermarket pedal shifters that are longer than the stock ones? The tiny OEM shifters makes it much harder to shift whilst doing a sharp corner.

    I like to drive at 2 o'clock and 10 o'clock position rather than the 3 and 9 o'clock position when using the pedal shifters.

    Something like this would be good.

    https://www.eurokoncepts.com/Ferrari...les_p_153.html

  2. #2
    Member Array
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    nope.

    but you are welcome to use some superglue and a piece of plastic :-D
    2003 CL9 5AT *ECU REFLASHED*
    CT-E Icebox|Ralco RZ pulleys|K&N filter|DC Header|250cell Cat|Cusco Tower & H Brace| H.Drive Coilovers | Rays RE30 18x8.5 | S/S Brakelines | Rigid Collars

  3. #3
    Member Array
    Join Date
    Oct 2004
    Location
    www.alibaba.com
    Car:
    porsche boxster
    Could probably modify a stock pair using fibreglass and resin

    Just need a bit of ingenuity

  4. #4
    I should just get my boys in the workshop to mill a sample out of some off left over billet aluminum.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.