Results 1 to 4 of 4
  1. #1
    Ozhonda Trader Array
    Join Date
    Nov 2009
    Car:
    previous S2000

    Lightbulb Toyota Landcruiser Detail (Picture Heavy!)

    Just recently we had the chance to do probably one of the larger cars we have done in a while, a 100 Series Toyota Landcruiser (small tank!).

    This Family run about needed some loving to bring it back to its former glory days! Of course as a daily commuter its nothing usual and one of the better ones we have seen over the years.

    Below you can see the condition when it arrived to us, and not too bad at all in fact. I do need to mention we would not recommend a light interior or leather for your family run about as kids with crayons and textas .... enough said! s! (argh!)


    Paint



















    Finger Prints anyone?


    (erk!)









    Drink clearly spilt over the door trims/speaker.



    Leather clearly had some sort of water/liquid staining.

    ----------------

    We started with a mixture of the 303 Fabric & Vinyl Cleaner in some warm water to clean up the interior trim and followed with a full Interior Shampoo Extraction to clean the beige/tan upholstery also using 303 in the vacuum/shampoo extractor.

    50/50 Shot


    Drivers Door




    Window Trim



  2. #2
    Ozhonda Trader Array
    Join Date
    Nov 2009
    Car:
    previous S2000
    Next to follow was a full Rejuvenation to the Leather using the Leatherique Products. This product always surprises us on how much it really changes the look, feel and finish of your leather!

    Centre Console 50 / 50 Shot




    Drivers Seat 50 / 50 Shot




    We followed of course doing the whole leather interior and allowing a full day for the Leatherique Oil to pull all the dirt up to the surface for a full clean with the Leatherique Prestine Clean, following with the Duragloss Leather Conditioner to put some natural scent and make the seats soft and supple once again.

    With all plastic/vinyl trim we applied 303 Aerospace Protectant to leave a factory style satin/matte finish that is not greasy and also contains SPF40 protection for the Australian Sun. For the woodgrain, GPS/Headunit and other areas Duragloss Fast Clean & Shine to clean and also leave a small smidge of protection for those finger prints!
































  3. #3
    Ozhonda Trader Array
    Join Date
    Nov 2009
    Car:
    previous S2000
    Exterior Wise the Paint was in reasonable condition. Few light wash marks but nothing too heavy. We opted for Nanolex NanoWax which lies between a light abrasive with cleaners that will brighten and protect the paintwork for up to 6 months and help that pearl metallic flake pop up a bit more giving some depth and clarity to the Pearlescent White Paintwork. Finishing off with a light coat of the Nanolex Premium Spray Sealant for that extra layer of protection!







    A few beading shots - very tight beads in areas, but we found more 'sheeting effect' than beading

















  4. #4
    Member Array
    Join Date
    Aug 2011
    Location
    Sydney
    Car:
    Honda S15
    Always impressed with your work!
    Choke dealer

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.