Page 1 of 2 12 LastLast
Results 1 to 12 of 20
  1. 27-06-2012 01:43 AM #1
    V73C
    V73C is offline
    Member Array
    Join Date
    Jul 2006
    Location
    QLD

    Car in gear but not moving

    Hey guys, my friends car isnt moving when in gear.
    She says it goes into gears but the csr just revs and does nothing.
    Could it be driveshafts ? It just seemed to happen after a night on nebo :/
    Ive driven the car before, clutch is strong. I doubt the clutch gave out.
    Car is a delsol with a b16 and mfactory 4.9 final drive.
    Thanks in advance.
    Quote Originally Posted by dwn_boi View Post
    not quite sure how to spell but taste mad, its hard on the outside and creamy on the inside omfg so good
  2. 27-06-2012 01:59 AM #2
    GSi_PSi
    GSi_PSi is offline
    Member Array
    Join Date
    Jan 2008
    Location
    Sydney
    Car:
    legtec @2psi
    sounds like driveshaft snapped

  3. 27-06-2012 02:19 AM #3
    V73C
    V73C is offline
    Member Array
    Join Date
    Jul 2006
    Location
    QLD
    My cousins b16b also did this agoes ago with a car load of people. Did first to second and it stopped moving. It was a drive shaft problem also.
    I just dont see an open diff car breaking it so easily. Its never seen a hard launch since shes had it
    Thanks for the reply. Ill get her to.check it out.

    Anyway to tell if the drive shaft is broken by jacking it up and spinning the wheels ?
    Quote Originally Posted by dwn_boi View Post
    not quite sure how to spell but taste mad, its hard on the outside and creamy on the inside omfg so good
  4. 27-06-2012 02:28 AM #4
    GSi_PSi
    GSi_PSi is offline
    Member Array
    Join Date
    Jan 2008
    Location
    Sydney
    Car:
    legtec @2psi
    jack car up, go underneath, they usually snap on the shaft collar that is closest to the gearbox so try and wiggle it around, if its snapped you will know

    good luck

  5. 27-06-2012 04:24 PM #5
    V73C
    V73C is offline
    Member Array
    Join Date
    Jul 2006
    Location
    QLD
    Thanks a lot man, ill let her know and get back to see how it goes.
    Quote Originally Posted by dwn_boi View Post
    not quite sure how to spell but taste mad, its hard on the outside and creamy on the inside omfg so good
  6. 27-06-2012 05:17 PM #6
    stndrd
    stndrd is offline
    Member Array
    Join Date
    Sep 2008
    Location
    Melbourne
    Car:
    Kermit K20A
    If you are saying that she puts it in gear, releases the clutch as if she is taking off and you have no drive, I would be more inclined to say the clutch is not engaging correctly. A clutch can "feel" strong right up until the point it no longer engages
    Kermit EGK20A
    Winton: 1:35.08
    Wakefield: 1:08.8
  7. 27-06-2012 06:58 PM #7
    spn.fed
    spn.fed is offline
    Member Array
    Join Date
    May 2011
    Location
    Melbourne
    Car:
    integra dc4
    i think its the gearbox ... i would get it checked out. This happened to my parents honda CRV too.
  8. 28-06-2012 01:59 AM #8
    V73C
    V73C is offline
    Member Array
    Join Date
    Jul 2006
    Location
    QLD
    But if the clutch is not biting then it wouldn't go in gear right ?
    Quote Originally Posted by dwn_boi View Post
    not quite sure how to spell but taste mad, its hard on the outside and creamy on the inside omfg so good
  9. 28-06-2012 04:24 AM #9
    GSi_PSi
    GSi_PSi is offline
    Member Array
    Join Date
    Jan 2008
    Location
    Sydney
    Car:
    legtec @2psi
    Quote Originally Posted by stndrd View Post
    If you are saying that she puts it in gear, releases the clutch as if she is taking off and you have no drive, I would be more inclined to say the clutch is not engaging correctly. A clutch can "feel" strong right up until the point it no longer engages
    there would be slight jerking, car would eventually stall if you let off the clutch

    plus they said clutch is good..

  10. 02-07-2012 12:14 AM #10
    ECU-MAN
    ECU-MAN is offline
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    sounds like the clutch is gone
  11. 03-07-2012 06:10 PM #11
    Zilli
    Zilli is offline
    You know you want too... Array
    Join Date
    Sep 2005
    Location
    Sydney
    Car:
    DC2R + VT750c2
    You'd have to have 2 snapped shafts and one hell of a racket for it to be the shafts
    - not removed by choice! - waiting for the next update to the saga
    http://www.ozhonda.com/forum/profile...=ignore&u=6316
  12. 03-07-2012 08:58 PM #12
    GSi_PSi
    GSi_PSi is offline
    Member Array
    Join Date
    Jan 2008
    Location
    Sydney
    Car:
    legtec @2psi
    Quote Originally Posted by Zilli View Post
    You'd have to have 2 snapped shafts and one hell of a racket for it to be the shafts
    not two.. all it takes is one..

    see it all the time at the drags

« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.