My mates project, EG/ G22 frankenstine turbo.

[ThePacman]

Here it's the original thread I started in the civic section...

http://www.ozhonda.com/forum/showthr...22-Frankie-EG4

Here is the specs on the motor etc, for those who couldn't be bothered reading the other thread.....

F22A1 Block
Custom Aluminium 5.5Qty Sump
Crankshaft Re-Grind
Eagle Rods
CP Pistons 85.5mm
Block Guard
2mm Copper Head Gasket
H22A4 Head
Port and Polish
Ferrea 6000 Series Valve Seats
Ferrea Valve Locks
Ferrea Valve Stem Seals
Ferrea Stainless 6000 Series Valves
Ferrea 6000 Series Beehive Valve Springs
Ferrea 6000 Series Beehive Titanium Retainers
Ferrea Roller Rockers
Ferrea Roller Camshafts
All New Bearings Through Out
Billet Cam Seal
Unorthodox Light Weight Crank Pulley
OBX Lightweight Pulley Kit
OBX High Volume Fuel Rail
Thermal Intake Manifold Gasket
Skunk2 Pro Intake Manifold
Skunk2 Pro 70mm Throttle Body
Skunk2 Pro Titanium Cam Gears
Tial 46mm Wastegate
GT 35/40r Garret Turbo
Vision 10.3mm Spark Plug Leads
NGK Platinium Spark Plugs
Jun Spark Plug Cover
Vision External Coil
Walbro 255Lb Fuel Pump
Fuel Regulator
JDM High Volume Fuel Filter
GReddy Oil Filter
NRG Engine Damper
STR Dipstick
Hasport Engine Mounts with 70A Bushings
HKS SSQV BOV
OBX 1.5 LSD
Extreme Carbon Cushion Button Clutch
Fidanza 8Lb Flywheel .

And this is where he is with it now....

[Jccck]

G22! Now THAT is awesome.
Don't think i've heard of one in Australia before?!
Brilliant combo' though.. Looks mint.

[EKVTIR-T]

Cool project

Why front wheel drive?

[ThePacman]

Cause Civics are front wheel drive....!

He's considered the conversion though....!

[jdm18c]

thats insane!!!!!!!!!!!!!!!!

[dc2r_fAn]

looks fantastic.... what power figures is that making?

250+atw?

[ThePacman]

He's expecting an easy and relyable 400fwhp @ around 15lb......

Added engine shipping list to first post.....

[Jccck]

He's expecting an easy and relyable 400fwhp @ around 15lb......

Added engine shipping list to first post.....

Should be well possible!
I know of a few G22A's making 500+ WHP with under 20psi.

[ThePacman]

Yeah, it's a reasonable figure. I'm just worried that it will be a dog for him to drive.

It'll be lucky to idle under 2000rpm. And this is supposed to be his daily...

[Jccck]

Yeah, it's a reasonable figure. I'm just worried that it will be a dog for him to drive.

It'll be lucky to idle under 2000rpm. And this is supposed to be his daily...

I re-read the shopping list.
What cc injectors?
What compression? Hopefully standard ratio..
I can't see any reason this won't achieve factory idle.

[ThePacman]

He's using RC 750cc injectors, not sure what his c/r is.
But with the roller cam set up, no Vtec, those cams are HUGE....!
It wil idle like a bitch....!

[Scholzey]

noooo! no vtec