RB1-ODC **Stance Build Thread**

[Rage King]

Hi Guys,

Got an RB1-ODC, and had it for a while now, but i think its time to build her up for the stance appearance... not too ricey but a clean bangabus

The ODC is complete stocker at the moment, apart from the Black ass tint all round and a set of SMD/LED interior and exterior lights fitted. So far ive got some parts that is being prepped up for fitting but just havent had the time to do it..

Parts TBF (to be fitted)
- Philips 35w 6k Slim digital ballast HID kit (INSTALLED)
- Absolute Fog Light kit (INSTALLED)
- Reverse Cam with Sensor RearView mirror kit
- DBA wiperslot front rotors (INSTALLED)

Parts on order
- HKS Hipermax Cwagon coilovers (To be installed soon)
- K&N Drop in Filter (INSTALLED)
- Genuine Black Floor mat set (To be installed soon)

Wish/WTB Parts
- Modulo/Absolute roof spoiler
- Modulo/Absolute side skirts
- Modulo Front Lip (INSTALLED)
- Modulo Rear Lip (To be installed soon)
- Mugen Grill (INSTALLED)
- 19inch Wheels (pref staggered config)
- HARDRACE Rear adjustable camber kit (To be installed)
- Rear sway bar kit (must be thicker than OEM is 12-14mm)
- Complete K24A JDM Spec / Absolute ODC or Accord Type R (Searching)


So i guess ill be doing this nice and slow as parts are hard to come by and i will update with pics, progress of my build.

any inputs or suggestions is appreciated

[Rage King]

does anyone know what are the interior dash colour variants? as my dash and cluster lights are all BLUE ... is this standard AUDM?

[AusAccord]

yes, blue is standard for AUDM. JDM pre-FL Absolute is red and thats the only different color for RB1

[evolution]

Hi Guys,

Got an RB1-ODC, and had it for a while now, but i think its time to build her up for the stance appearance... not too ricey but a clean bangabus

The ODC is complete stocker at the moment, apart from the Black ass tint all round and a set of SMD/LED interior and exterior lights fitted. So far ive got some parts that is being prepped up for fitting but just havent had the time to do it..

Parts TBF (to be fitted)- Modulo Front Lip
- Modulo Rear Lip
- 35w 6k Slim digital ballast HID kit
- Absolute Fog Light kit
- Reverse Cam with Sensor RearView mirror kit
- DBA wiperslot front rotors

Parts on order
- Teins Super Flex coilovers
- M7 or HKS or K&N Drop in Filter (undecided as the seller is out of stock and sourcing out what is available)
- Genuine Black Floor mat set

Wish/WTB Parts
- Modulo/Absolute roof spoiler
- Modulo/Absolute side skirts
- Mugen Grill
- 18inch Wheels (pref staggered config)
- Rear adjustable camber kit
- Rear sway bar kit (must be thicker than OEM is 12-14mm)


So i guess ill be doing this nice and slow as parts are hard to come by and i will update with pics, progress of my build.

any inputs or suggestions is appreciated

Nice... what year and colour is your RB1? Hope it's not a Face-lifted 06+ Silver

Just a few things you might want to consider:

1) Check that the bezel on your foggies will fit your Modulo lip kit as the ones for the Absolute model is different.

2) Would suggest you go the full hog and upgrade front and rear rotors and pads plus get Stainless Steel brake lines. You will not get any braking improvement just with front slotted rotors.

3) Go for K&N filter, HKS is a use and throw away, where as K&N is washable.

[Rage King]

My ODC is pearl white..

Edit: pre-FL - 10/2005

Any locals selling braided brake lines?

What pads do u recommend?

Ill see how i go with the fog lights as i know i got to cut through the front bumper.

Do you know if there are markings behind the front bumper so i can use it as a cut out guide? My kit didnt come with any templates etc.

[AusAccord]

let me guess then, your is a pre-FL RB1. as far as i know only aka_NSX DIYed foglight kit on pre-FL model here

[Rage King]

let me guess then, your is a pre-FL RB1. as far as i know only aka_NSX DIYed foglight kit on pre-FL model here

yep it is.

i hope he sees this thread and shed some light on my situation.

[AusAccord]

actually its not hard to take the front bumper off then you will see if any trace marks by Honda
i've done that by myself and its fun!!

[Rage King]

actually its not hard to take the front bumper off then you will see if any trace marks by Honda
i've done that by myself and its fun!!

Might tackle the foglight install this weekend. got a dremel kit to ease up the tight cutting.. just gotta figure out the wiring/harness of the foglight ..

Also do you know if the 3rd row seats need to be in IGN mode to power up?

[evolution]

My ODC is pearl white..

Edit: pre-FL - 10/2005

Any locals selling braided brake lines?

What pads do u recommend?

Ill see how i go with the fog lights as i know i got to cut through the front bumper.

Do you know if there are markings behind the front bumper so i can use it as a cut out guide? My kit didnt come with any templates etc.

Actually I wouldn't recommend getting fog lights only because I haven't used mine at all after installing them, but yeah only aka_NSX has done the install for a pre-facelift and his ODC has got the Modulo front lip as well.

In terms of pad recommendations, I've heard EBC green/red is good for grip and less brake dust
I haven't used them before as I'm using a Big Brake kit upgrade on the front with proprietary pads and RDA rotors and pads on the rear
http://www.ebay.com.au/itm/HONDA-CRV...item19c4009307

Not sure who does SS brake lines for the Odyssey locally as mine came with the BBK upgrade kit, might have to ask some brake places?

[evolution]

Might tackle the foglight install this weekend. got a dremel kit to ease up the tight cutting.. just gotta figure out the wiring/harness of the foglight ..

Also do you know if the 3rd row seats need to be in IGN mode to power up?

Key doesn't need to be inserted to operate the auto 3rd row, but I think the car must be on ground (ie not jacked up). I had the car up on the hoist once and tried to operate the third row and it wouldn't move.

[Rage King]

^^ thanks for the clarificaiton..

with regards to drop in K&N filter ..is this the correct part number for it? K&N 33-2072 or is this a part number that is compatible to our ODC?

i need the fog/driving lights as i do alot of distance driving int he night