RB1-ODC **Stance Build Thread**

[mr180sx]

ive posted pictures on the forum somewhere if you want to check them out

[2k1cvc]

ive posted pictures on the forum somewhere if you want to check them out

Im just saying that 19x9.5 +35 to fit just "fine" is impossible. My last set was 20x 9.0 +38 at the rear and i still had to do work on the body and adjust rear cambers etc..

[Rage King]

Dont mean to be a hater but how in the world do you come up with that? Im running 20x10 +35 on 225/35/20 and it looks like this with camber arms and lowered

Fuu bro.. Lucky i didnt buy dem or else it would look like your setup...

Looks great though

[2k1cvc]

Fuu bro.. Lucky i didnt buy dem or else it would look like your setup...

Looks great though

With the right camber adjustment + lowering and guard rolling you will be able to have clearance with no issues at all. Mine is about 5mm from touching the guards

[Rage King]

true that but rears arent sitting dead flat straight right?

would have crazy camber?

[2k1cvc]

true that but rears arent sitting dead flat straight right?

would have crazy camber?

surprisingly its almost flat, not much crazy camber at all

[Rage King]

surprisingly its almost flat, not much crazy camber at all

What was your setup size again??

Size?
ET?
How low if your ride?

Im stuck trying to figure put the best ET and width without going overboard..

So im looking around 19x8 or 8.5 all round..

What would be the ideal ET ?? Not worried bout guard rolling or flaring.. But i would like a nice dish look...

Thanks

[Rage King]

***UPDATE***

After a long awaited wait and searching,

i have finally received my items below;

1 x set of 4 - HKS Hipermax Cwagon coilovers height/damper adj from Japan - needs new boot though -on order)




1 x pair of HARDRACE Rear camber kit
(shown on the pics)

1 x complete set of Genuine RB Odyssey black floor mats (purchased locally from someone for $100 delivered who bought these brand new from dealers and written off their ODC and never got to fit them)


****en wynning!

more goodies to come.

[aka_NSX]

Nice Mods . . . .

I have post my wheels spec on your other thread, and seems like the mods on your Odys almost done, congrats

[niiCk]

heres my mates car:

Odyssey RB1 dropped on BC coilovers, cayenne turbo twists

[evolution]

Looks good

[Rage King]

Nice Mods . . . .

I have post my wheels spec on your other thread, and seems like the mods on your Odys almost done, congrats

Thanks bro.. Yup i saw.. 20inch is crazy for me.. As i always haw a full load hence im looking into 19inch..

Im so jealous .. Every1s RBs look neat and simple.. Thats the look i want...