ek- srs light stays on. diagnostic- increased resistance passenger airbag

[grifty]

Quick fix for this issue.

Remove the blub behind the SRS Sign on the dash.


I know of many people doing this, no1 has been caught.

Lol not as easy as it sounds on a EK.....

[ECU-MAN]

Done well to fix those problems.

Your SRS code 2-2 is increases resistance in the passengers inflator or dummy resistor, remove your dummy resistor and measure its resistance. Should be 2 Ohms

[knight rider]

Done well to fix those problems.

Your SYS code 2-2 is increases resistance in the passengers inflator or dummy resistor, remove your dummy resistor and measure its resistance. Should be 2 Ohms

Great thanks will do, will report back when it's fixed hopefully. Very time consuming problems but cheap fixes.

[knight rider]

Replaced the resistor and reset the codes, all good now NO SRS light on . So thanks again for all the info posted here.

[Sean628]

Bump the old post
I got only one srs code: 2-2 in my 95 integra but I do actually have a passenger airbag fitted, does that mean the airbag's bad, it's so hard to find a passenger side airbag, been looking for weeks, can anyone confirm this?

[ECU-MAN]

You do not have to have a passengers side inflator to have this issue, if you did have a passengers side inflator you would know, follow my instructions in post 26 regarding the dummy resistor as it applied to you.

Have you checked the service manual that code 2-2 is increases resistance in the passengers inflator or dummy resistor for the Integra ?