CU2 Wheel Size - Will these wheels+tires fit

[black8thgen]

Hey
i have no idea about wheels
so just wondering if 18x9 +28 at the front and 18x10 +18 at the back would go on a CU2 easy?
if not what would be required?

[ExpressCoffee]

Hey guys, would

Diameter / Width / Offset: 19 x 8.5 + 28 / 19 x 9.5 + 30 fit on my car? I am lowered on tein coilovers. I will roll the rear guards. Do I need camber arms?

[kelvinator124]

Hey guys, would

Diameter / Width / Offset: 19 x 8.5 + 28 / 19 x 9.5 + 30 fit on my car? I am lowered on tein coilovers. I will roll the rear guards. Do I need camber arms?

You'll probably need them for the front.

Hope this helps

[kelvinator124]

Hey
i have no idea about wheels
so just wondering if 18x9 +28 at the front and 18x10 +18 at the back would go on a CU2 easy?
if not what would be required?

No it wouldn't be easy since stock wheels have 55+ offset and u have at least 2 inches sticking out for both front and rear wheels so need roll guards especially the back, camber arms as well as being lowered.
Hope this helps

[ExpressCoffee]

You'll probably need them for the front.

Hope this helps

The fronts are already rolled from factory. That should be ok I hope?

Thanks for your reply!

[I CU2]

Hi guys,

Just wondering if Lexus wheels will fit onto the Euro okay?

Size: 18 x 8.0 for the fronts, 18 x 8.5 for the rear
Bolt Pattern: 5 x 114.3
Offset: 45mm front and 50mm rear

Thanks

- would the offset look retarded?

[I CU2]

Just read that Toyota's bore size is smaller than Honda's though...aww

[blabla]

Hey,

Looking at 20's now finding it hard to find 19's that I like. What I'm needing to know which offset will fit better (offered offset from and to are +15 to +47), I don't want to roll guards at all I am thinking of lowering it but not sure of height something like 1.20front and 0.8 in the rear the rims are a koya Sf04 it's a 8.5 wide rim, they offer custom offsets. I don't want the fronts to poke out all happy to have it flush and a little tuck in the rear.

Thanks in advance