Im hoping someone with experience can help me out here,
Recently done b18c conversion with everything.
The eg gli loom + rywire obd2 to obd1 harness + b18c conversion.
What do i do with the o2 sensor ?
I know i have to wire it up - but where?
Car starts and turns on however idles for a while and seems to be looking for the right place to idle.
vtec is also non existant at this stage.
any help would be appreciated and direct information leading to everything working im happy to give a small thank you money donation to.
I have looked all over the web and attempted to use this ->
2nd 02 Sensor ECU Connector
White Wire TO D14 – Sensor Heater 02 Signal (SH02S)
Green Wire TO D11 – Sensor Ground 2 (SG2)
Black Wire TO A5 – Secondary Heater 02 Control (S02HTC)
Black Wire TO A11 – Power Source 1 (1GP1)
this looks like it would work , hoever, D14 is non existant on the harness so i have no idea what to do!
Thanks for anyone taking the time to try to help!
Reply With Quote
Bookmarks