[CU2] Front number plate holder and Slim number plates

[I CU2]

Hey guys,

I've seen some of your CU2's without the number plate holder at the front, was just wondering how did you manage to remove it?

It's bigger than the slim number plates and over hangs at the bottom.

Here's what I'm talking about:

[marquee]

I'm pretty sure it's just remove the number plates and u will see two square s that u can pop out with a flat head then behind that there will be two screws that's how it is on the cl9 should be the same

[MR_LATE]

Yep. That's it. Or u can use and air saw if u want to keep the plastic but have it flush

[euRo_noob]

Yep. That's it. Or u can use and air saw if u want to keep the plastic but have it flush

What MR_LATE said. A few people sawed theirs off or they just took out the black frame at the back. It's just simple bolts, not that hard.

[MR_LATE]

air saw is 100-130$. so if u got a friend who has one. borrow it. since i had to buy mine, ive only ever used it twice.

[marquee]

air saw is 100-130$. so if u got a friend who has one. borrow it. since i had to buy mine, ive only ever used it twice.

Looks like he has a friend who has one

[ope126]

I used to have a CL9 and you could remove the black plastic holder and then get a larger / narrower one to suit "EURO" style number plates.
I spoke with Honda parts and it appears that this "EURO" plate holder is not available for the CU2.

Can anyone share there expeiences or how they now attached Euro Number Plates...

Might contact Honda UK, they will have em'.

[ope126]

I ended up ordering from www.lakinplates.com.au
I got the front and rear kit to suite "Euro" sized plates.
They work a treat!!!

[pitiek]

What do these brackets do?

[supersaiyan]

i took off these brackets, and i can't seem to put it back on? how do i install it lol so noob?

on the black rubber thing, does the circle bit hit the paint of the car or the flat circle side?

can't seem to screw it back on?