Originally Posted by dougie_504 Anybody with this setup able to test if they eat EM1 rims if possible? Or i can meet up and try putting my EM1 rim over this setup. Curious to know, would like to consider this upgrade if it fits. A bit late to the party, but yes. I am running a 282mm setup and they do clear EM1 stockies. Gw Grofty tightarse industries.
Originally Posted by cbauto grifty, I read your thread. not a single ounce of information about rear brakes bump. heard something about EU rotors on dc5r calipers. someone do the legwork for me.
SSpamily
Originally Posted by cbauto bump. heard something about EU rotors on dc5r calipers. someone do the legwork for me. Seriously bo Rly
SSpamily hehe
Fuk off bo. Rums diy is good. Go make one for rear brakes
part time potato
For rears u need Disc brake rear trailing arms Hubs dc2r/prelude 97-01 Mazda 626/protege hub nuts Calipers dc2r/ep3/dc5 Rotors dc2r Brake hoses, handbrake lines
Originally Posted by dorikin For rears u need Disc brake rear trailing arms Hubs dc2r/prelude 97-01 Mazda 626/protege hub nuts Calipers dc2r/ep3/dc5 Rotors dc2r Brake hoses, handbrake lines dats 5stud doe bo man thats all u need wtf u asking eu rotors, dc5r calipers, flip upside down, put handbrake mech from yours to dc5, also need disc brake knuckle if not, cant use drum eu rotor part # RDA7929
Last edited by carayan; 30-04-2014 at 10:04 PM.
Originally Posted by Vvvtec Fuk off bo. Rums diy is good. Go make one for rear brakes You could learn a thing or two from carayan.
Looool
Originally Posted by Vvvtec Fuk off bo. Rums diy is good. Go make one for rear brakes good idea. someone should do this
Great post! I got my 17CL15VN calipers at the wreckers from an Accord V6. I have an EK1 CXI, so I swapped the rear drums for GLI discs too.
Updated with more information
OEM parts whore
is it a must to run 1inch booster ? im currently running ek4 on the ek1 =/
B-serious m8
View Tag Cloud
Forum Rules
Bookmarks