Spark Plugs?

[EKVTIR-T]

use a socket set and change spark plug by youself diy

GOOD post mate,diy will be best for more money in pocket

[Fredoops]

Damn, and here I thought it would be a cheap upgrade.

http://www.okadaprojects.com/usa/products_direct.htm

$985 for plasma ignition, damn.

Yea but your sparkler plugs would be shooting Frickin Lasers!


Otherwise, anyone looked into "ignition boosters"?
Looks like the boost the voltage of the ignition pack and produce a stronger spark, outcome similar to msd's?

[ChaosMaster]

Yea but your sparkler plugs would be shooting Frickin Lasers!


Otherwise, anyone looked into "ignition boosters"?
Looks like the boost the voltage of the ignition pack and produce a stronger spark, outcome similar to msd's?

I've been looking around, but I can't seem to find anything of the like. Have you found any brand that does it so I could do some research?

[Fredoops]

I've been looking around, but I can't seem to find anything of the like. Have you found any brand that does it so I could do some research?

Vsd ignite?

Btw you'll probably also need a voltage stablizer if you are going to overvolt anything

[ChaosMaster]

Found something interesting
http://www.youtube.com/watch?feature...&v=MN644ojBcdc

[Fredoops]

Found something interesting
http://www.youtube.com/watch?feature...&v=MN644ojBcdc

Plasma ignition creates a hell of a spark/fireball.

[ChaosMaster]

I'll see what pricing is like when it becomes available. Might give it a shot.

[Fredoops]

I'll see what pricing is like when it becomes available. Might give it a shot.

http://www.horsepowerfreaks.com/part...t/11111//Acura

785 dollars.

Or you could get a ignition booster for under $200

[ChaosMaster]

http://www.horsepowerfreaks.com/part...t/11111//Acura

785 dollars.

Or you could get a ignition booster for under $200

FML, I knew plasma coils were expensive, was hoping this controller unit, using the OEM coils, would be cheaper.

[Type R Positive]

I just ordered from USA. $40 each here, or $40 a set there.

[mrshibby]

Hi Gents,

Just purchased 4 NGK LASER IRIDIUM spark plugs off eBay and now to fit them. Is it as easy as ripping the old ones out and chucking the new ones in or is there more too it? e.g. do I need to grease the new plugs or anything?

Cheers

[EKVTIR-T]

Yes, simply remove and fit new

do not use grease