Results 1 to 9 of 9
  1. #1
    Member Array
    Join Date
    Sep 2011
    Location
    forever waiting
    Car:
    no weetek civic

    Swapping older engine into later model car

    Hey guys, I'm going to be purchasing a 2000 ek sedan, and at some point will be doing a B swap. What's the legalities on swapping an engine older than the car it's going into?

    Cheers!

  2. #2
    You cannot fit an engine to your car that is from an older model.. Put simply. If your car is from 1993 you cannot put an engine in it from a car that was produced in 1992. It must be from the same year or later.

    Sure it can be done. But I'm also unsure with regards to what happens when you get pulled over (Officer checks engine against chassis....)? Besides pretty sure it's been done.

    Good luck!

  3. #3
    Member Array
    Join Date
    Sep 2011
    Location
    forever waiting
    Car:
    no weetek civic
    Quote Originally Posted by Kelezzay View Post
    You cannot fit an engine to your car that is from an older model.. Put simply. If your car is from 1993 you cannot put an engine in it from a car that was produced in 1992. It must be from the same year or later.

    Sure it can be done. But I'm also unsure with regards to what happens when you get pulled over (Officer checks engine against chassis....)? Besides pretty sure it's been done.

    Good luck!
    Yeah my biggest concern is if I get pulled over and they begin the rear end investigation nawmsayin'.

  4. #4
    Yeah that's what I want questioned also. Better off just getting a pre-face EK sedan. But entirely up to you, but as I've mentioned the swap will be illegal on paper somewhere.

    Cheers

  5. #5
    An efi B16a series engine out of a 1988 CRX can be put into a 2000 Ek civic - just swap over all OBD2b emissions parts onto it.

    In saying that , as long as the motor matches or surpasses the emission standard of the chassis it is going in - it can be done.

  6. #6
    Quote Originally Posted by bennjamin View Post
    An efi B16a series engine out of a 1988 CRX can be put into a 2000 Ek civic - just swap over all OBD2b emissions parts onto it.

    In saying that , as long as the motor matches or surpasses the emission standard of the chassis it is going in - it can be done.
    this.

  7. #7
    Member Array
    Join Date
    Sep 2011
    Location
    forever waiting
    Car:
    no weetek civic
    Quote Originally Posted by bennjamin View Post
    An efi B16a series engine out of a 1988 CRX can be put into a 2000 Ek civic - just swap over all OBD2b emissions parts onto it.

    In saying that , as long as the motor matches or surpasses the emission standard of the chassis it is going in - it can be done.
    Ah ok, and by saying that, what do you mean by 'emissions parts'?

  8. #8
    Quote Originally Posted by carayan View Post
    Ah ok, and by saying that, what do you mean by 'emissions parts'?
    Meaning the engine is converted to run OBD1 (92-95) , OBD2a (96-99) or OBD2b (99+) and relevant sensors such as O2 sensor/s , rear vacuum ports etc

  9. #9
    Member Array
    Join Date
    Oct 2006
    Location
    Hunter Valley NSW
    Car:
    lownslowsedan
    You can also get all relevant EPA testing done in order to get it approved, as long as it meets or exceeds.
    to see all of my build, checkout


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.