-
So you are saying a 120k klm R complete head, block and pistons,inlet, throttle body,exhaust et al is only worth $10.
The motor is apart hence I know what its problem is and it was owned by a third party so no I don't need a decent sump or mechanical sympathy .I believe the young lad didn't check his oil level.
As for my own R its running like a clock.
-
Best bet would be to get the block & crank off to a machine shop tobget everything measured up so you know how expensive it will be to rebuild
Kermit EGK20A
Winton: 1:35.08
Wakefield: 1:08.8
-
Originally Posted by Fraser
So you are saying a 120k klm R complete head, block and pistons,inlet, throttle body,exhaust et al is only worth $10.
The motor is apart hence I know what its problem is and it was owned by a third party so no I don't need a decent sump or mechanical sympathy .I believe the young lad didn't check his oil level.
As for my own R its running like a clock.
Fraser, if you know the extent of the issue and damage, I guess work backwards, engine is worth 3k for example, by the time you linish or correct the crank, supply bearings, gaskets and more then likely O/H the head, 1k odd, sell it for 1.5-2k as the buyer would with assembly have a rebuilt engine, or put it back together and sell it as rebuilt for 4-4.5k?
-
At last someone on the same page , thanks I D/T.
-
Originally Posted by Fraser
At last someone on the same page , thanks I D/T.
Potato
Last edited by joyride; Today at 07:26 AM. Reason: Ask for permission if you're going to use someone elses pic
-
Originally Posted by Fraser
So you are saying a 120k klm R complete head, block and pistons,inlet, throttle body,exhaust et al is only worth $10.
The motor is apart hence I know what its problem is and it was owned by a third party so no I don't need a decent sump or mechanical sympathy. I believe the young lad didn't check his oil level.
As for my own R its running like a clock.
You never specified either of these things, hence the suggestions.
All the best.
S P A M | W O R K S
hehe.
PHC
-
Your best option is to part out the motor. Cams are about $200-300, head $500-700, exhaust/headers... etc...etc...
But Keep in mind with the popularity of the K-swap, parts for the b-series motors aren't that sought after anymore; people rather do a k24 swap and call it a day.
-
To be honest I doubt you'd get more than $1,000-1,500 if the bottom end is shagged. IM and TB is about $300, OEM header isn't worth jack really, sell the head complete for $500+.
If I were you I'd just get a B20 block and be done with it
-
Originally Posted by dougie_504
To be honest I doubt you'd get more than $1,000-1,500 if the bottom end is shagged. IM and TB is about $300, OEM header isn't worth jack really, sell the head complete for $500+.
If I were you I'd just get a B20 block and be done with it
As stated previously my own vehicle and motor is perfect,this is one I've just acquired and want to sell off if its worth anything or repair it and sell it off.
Anyone got a crankshaft ?This one is marked and not within tolerance.
-
toda / int dist should have some lying around?
inb4duc
S P A M | W O R K S
With our special rotational tires, it will allow you to drive very fast. - JK Tyre
-
hmmm engine runs like a clock? needs a valve adjustment due to ticking.
Mate my bbk cost more than your Honda.
-Amant02
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks