Hi Guys
Last week i finally finished the brake upgrade on my eg civic (ITR disks and brakes, Prop valve and now a 1" Master). I modded the line and flared the new fitting on and bled the system fine.
took it for a drive to bed the pads in. then after abit the car got harder to drive....stopped tried to roll the car and the brakes were locked up. Gave the peddle a few hard pumps and it released...
I ended up doing the hnationals on the weekend with intermitent problem... every now and then it would happen not all the time.
What could it be? the Master Cylinder? i replaced the O ring inside it before putting it in, and the fitting i did notice has started to weep. so it needs reflaring
any ideas on a fix? rebuild master again? will fixing this line that weeping fix the problem?
thanks
Neil
Bookmarks