-
Just go to Repco and buy their Repco branded or a Ryco filter
Kermit EGK20A
Winton: 1:35.08
Wakefield: 1:08.8
-
Joey, do you know how to create a datalog, this is done by connecting to the S300 and recording as you drive around? We can tell straight away if it's the tune that's causing your car to run like shit (probably is) but it may be something else causing the bad fuel economy, such as a bad temp sensor etc.
I disagree on a tuner having to completely "retune" the map for a customer that simply wants a touch up. If both tuners have half a brain, they will ramp the car in the load conditions to see how bad it is, if it's fine at high load, rpm, why change it? You're just wasting your own time and customers money. Most tuners will tune high/medium high load and leave the rest, I've spent over 2 days tuning my partial throttle map on the street to be spot on and the car drives like a champ now, I seriously don't expect this from an average "tune" that I would pay someone.. I expect it to be in the ballpark though.
Typical dyno tuning is not something you can do in 2-3 hours, OEM guys take months and months, spend millions tuning it, cold start, hot start, tip in, throttle enrichments, compensations, emissions testing, heat generation, etc. It is impossible for someone to do this on the dyno in a few hours (especially the "his a shit tuner he didn't tune my cold start but he never had the chance to start it in the cold" LOL) - BUT... you can tune it to be decent on the dyno for partial throttle and should be good enough..
-
^^^^
Finally...
Some1 who actually has some sense and knows wat they talking about on here ...
I would have posted the same, but didnt wanna waste my time with keyboard tuners...
-
Originally Posted by Chr1s
Joey, do you know how to create a datalog, this is done by connecting to the S300 and recording as you drive around? We can tell straight away if it's the tune that's causing your car to run like shit (probably is) but it may be something else causing the bad fuel economy, such as a bad temp sensor etc.
I disagree on a tuner having to completely "retune" the map for a customer that simply wants a touch up. If both tuners have half a brain, they will ramp the car in the load conditions to see how bad it is, if it's fine at high load, rpm, why change it? You're just wasting your own time and customers money. Most tuners will tune high/medium high load and leave the rest, I've spent over 2 days tuning my partial throttle map on the street to be spot on and the car drives like a champ now, I seriously don't expect this from an average "tune" that I would pay someone.. I expect it to be in the ballpark though.
Typical dyno tuning is not something you can do in 2-3 hours, OEM guys take months and months, spend millions tuning it, cold start, hot start, tip in, throttle enrichments, compensations, emissions testing, heat generation, etc. It is impossible for someone to do this on the dyno in a few hours (especially the "his a shit tuner he didn't tune my cold start but he never had the chance to start it in the cold" LOL) - BUT... you can tune it to be decent on the dyno for partial throttle and should be good enough..
Thankyou for your input chris,
Yes, i can get you a datalog.. of just driving around with a few WOT runs?
Regarding the sensors, one thing i do know is that the temperature sensor is bypassed so the fan is always on..
-
Originally Posted by Joeey
Thankyou for your input chris,
Yes, i can get you a datalog.. of just driving around with a few WOT runs?
Regarding the sensors, one thing i do know is that the temperature sensor is bypassed so the fan is always on..
in4datalog
S P A M | W O R K S
With our special rotational tires, it will allow you to drive very fast. - JK Tyre
-
Did this issue get resolved ?
The life of a 4 stroke engine
It sucks it squeezes it bangs it blows
-
I think Adrian retuned it for him - I'm assuming it's all good in the hood now~
-
Originally Posted by mocchi
but toda is the best isnt it?
no, jdm is best
-
Originally Posted by Chr1s
I think Adrian retuned it for him - I'm assuming it's all good in the hood now~
They ask for advice in these threads go away and never finish the threads to let others know what the outcome was I just don't understand that.
The life of a 4 stroke engine
It sucks it squeezes it bangs it blows
-
Originally Posted by ALLMTR996
They ask for advice in these threads go away and never finish the threads to let others know what the outcome was I just don't understand that.
Still not sorted...
Was booked in for a re-tune / touch-up but he's still collecting parts & changing things...
That was about 6 months ago.
I call him from time to time & he still plans to have it done but is busy with work.
-
Originally Posted by Adrian @ SAS
Still not sorted...
Was booked in for a re-tune / touch-up but he's still collecting parts & changing things...
That was about 6 months ago.
I call him from time to time & he still plans to have it done but is busy with work.
Good to see us old blokes still around Buddy
The life of a 4 stroke engine
It sucks it squeezes it bangs it blows
-
Times two
Originally Posted by ALLMTR996
Good to see us old blokes still around Buddy
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks