B16A conversion with automatic gearbox??

[jtid_no1]

I have a 2000 Civic Coupe GLi which is powered by a D16Y engine with an automatic gearbox. I am seeking more power for the car and unfortunately I don't exactly have the biggest budget.

I called up Online Performance in Hoxton Park, NSW and was advised that it would cost me around $7,000 for a B16A half cut from Japan with an automatic gearbox fitted into my car. I have been told that the cheaper option is to just put extra money into the current engine however I'm not too keen on that idea as it has done over 180,000 kms.

I would like to keep the car being an automatic but if the cheapest option is to convert it to a manual then I'm more than happy to do so.

What do you think my best option is?? Does anyone know how good a B16A would perform with an automatic gearbox??

[rayb3na_]

have different cams and stuff(I THINK).. but yeah auto b16a would be a nice daily? cheaper option of course would be a manual b16a you can probably get that isntalled for around 3k with a backyard specialists. hope that helped.

[jtid_no1]

Cheers for the advice mate.

[baeshin]

7 grand is too much.. dont do it

[defect]

yea source the motor yourself
theres a few selling on these forums, going from 2-3k
and just find yourself a auto gearbox
probably rare as, but there are some out there.

i saw one on this forum selling for 250 bucks before.

[[ricer]]

sif you'd spend 7k on a b16a into a ek lol

I have a 2000 Civic Coupe GLi which is powered by a D16Y engine with an automatic gearbox.

i though 2000model coupes were EM1 which were b16a manuals...
are you sure yours isnt a hatch back?

well anyway sell your car and add 7k and you'll get a heaps better car

[[[d a n n y]]]

im nearly finished with auto B16a conversion
cant wait till it runs

[dahon]

sif you'd spend 7k on a b16a into a ek lol


i though 2000model coupes were EM1 which were b16a manuals...
are you sure yours isnt a hatch back?

well anyway sell your car and add 7k and you'll get a heaps better car

GLi coupes were the lower model import compared tot he EM1s.
what exactly are the differences between auto b16 & manual? i kind of want to put one in my ek sedan as a daily auto.

[[[d a n n y]]]

u dont want to ...
too much hassle,..
it's get slightly less power too
and lower Rev limit too

[dahon]

ahh kz, why? the gearbox sticks out too much? new drive shafts?
it doesnt matter if it has less power... more power than my crappy sedan... lolz

[[[d a n n y]]]

G box is bigger than the normal manual G box's
i had to cut abut of my chassis out to fit the damn things in..

[MR.K]

So i heard that the auto b16a was detuned so the gearbox could handle the engine(or some reason like that)... im wondering if i put intake headers and exhaust on an auto b16a would this be bad for the gearbox aswell?