Results 1 to 11 of 11
  1. #1
    Member Array
    Join Date
    Mar 2013
    Location
    Perth NoR
    Car:
    S2k + CBX250

    stripping interior EG CIVIC

    I dont mind an uncompfy ride.
    but i cant handle it looking like sh*t from the inside.

    so how do people strip the EG's so they dont have that black stuff all over the floor?
    under th carpet is the black rubber like material i want it all gone, tried cracking it off in the rear under the rear seats, but little parts get left behind, i just hit it with a chisel and hammer trying to pull it all out.

    what methods does everyone else have?

  2. #2

  3. #3
    Member Array
    Join Date
    Sep 2008
    Location
    Melbourne
    Car:
    Kermit K20A
    Go and get yourself about 15kg of dry ice, dumo it on for about 10mins, move the dry ice to the next section then hit the original section with a hammer and watch it flake off
    Kermit EGK20A
    Winton: 1:35.08
    Wakefield: 1:08.8

  4. #4
    Member Array
    Join Date
    Mar 2013
    Location
    Perth NoR
    Car:
    S2k + CBX250
    yeh, i just found that diy thanks guys.

    ill give the kerosene a shot to get off the left overs in the rear.
    plan and painting the rear floor too.

    any one have any suggestions. i dont like carpet and plan on getting lighter seats.

  5. #5
    Member Array
    Join Date
    Jan 2006
    Location
    Melb SE Suburbs
    Car:
    94 EG, 95 EG
    Where is best to buy dry ice?

  6. #6
    Member Array
    Join Date
    Sep 2008
    Location
    Melbourne
    Car:
    Kermit K20A
    Vel go to BOC gas & gear on Greens Road in Dandenong South
    Kermit EGK20A
    Winton: 1:35.08
    Wakefield: 1:08.8

  7. #7
    Member Array
    Join Date
    Jan 2006
    Location
    Melb SE Suburbs
    Car:
    94 EG, 95 EG
    Will do thanks Josh

  8. #8
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    http://forums.overclockers.com.au/sh...d.php?t=949152


    Dry Ice: $10/kg
    LN2: $6/L

    https://boc.com.au/boc_sp/au/contact...ions/index.asp
    BROOKVALE 40 Orchard Rd NSW 2100 (02) 9939 1000
    CARINGBAH 25 Erskine Rd NSW 2229 (02) 9540 1144
    GOSFORD WEST 258 Manns Rd NSW 2250 (02) 4324 5444
    LISMORE 11 Snow St NSW 2480 (02) 6621 2739
    MARAYONG Lot 18 Vardys Rd NSW 2148 (02) 9622 1988
    ST PETERS 3 Burrows Rd Sth NSW 2020 (02) 9557 6660
    MINTO Cnr Ben Lomond Rd & Carey Grv NSW 2566 (02) 9820 1622
    MOOREBANK Cnr Seton Rd & Regents Crs NSW 2170 (02) 9600 9900
    NEW LAMBTON 268 Turton Rd NSW 2305 (02) 4957 7027
    ORANGE 16 Peisley St NSW 2800 (02) 6362 6022
    PORT KEMBLA Five Islands Rd, Cringila NSW 2501 (02) 4275 8000
    ST MARYS 116 Forrester Rd NSW 2760 (02) 9623 2285
    TAMWORTH Lot 27, Hargrave St NSW 2340 (02) 6765 4888
    WAGGA WAGGA 48-50 Hammond Ave NSW 2650 (02) 6921 5833
    WETHERILL PARK 428-440 Victoria St NSW 2164 (02) 9616 3333
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

  9. #9
    has anyone actually weighed the car before and after?

  10. #10
    Member Array
    Join Date
    Sep 2008
    Location
    Melbourne
    Car:
    Kermit K20A
    Sound deadening will strip approx 15kg & all the trims and carpet ends up being another 10kg or so. If you have a sunroof that saves another 5-7kg
    Kermit EGK20A
    Winton: 1:35.08
    Wakefield: 1:08.8

  11. #11
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.