Page 2 of 6 FirstFirst 12345 ... LastLast
Results 13 to 24 of 63
  1. #13
    Member Array
    Join Date
    Aug 2012
    Location
    canberra
    Car:
    DC2
    how far do you want to take this? id be interested to see how light someone could get a say street trim car as well as a track car

  2. #14
    ^^ I'll just list the weights for you guys and you can take your own directions with what parts you can happily go without.

    A/C Compressor 7.4kg
    A/C Compressor Engine Block Bracket 3.2kg
    Rest of A/C equipment in engine bay 7.3kg (not including wiring or, tensioner bearing and belt<my car was missing these 2 parts>)

    Some good numbers there 17.9kg

  3. #15
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    update your first post to include complete list so far?
    S P A M | W O R K S
    With our special rotational tires, it will allow you to drive very fast. - JK Tyre

  4. #16
    Member Array
    Join Date
    Jan 2010
    Location
    PnP Garage
    Car:
    BREEZE
    Excellent thread, thanks!
    part time potato

  5. #17
    Exhaust heat shield, behind fuel tank 0.4kg
    Power steering pump & bracket 3.7kg
    Power steering cooler 0.8kg
    Power steering lines, from cooler to reservoir inc hardware and reservoir 1.1kg
    Approx 1L of hydraulic fluid 1.0kg

    7.0kg

  6. #18
    As far as my calculations go thats 91.2kg thus far.

  7. #19
    Do you have a target weight?
    FFamily

  8. #20
    No real target weight.
    I started with the plans to remove all the dead weight and rebuild the engine with dual webers DCOE/delortos DHLA, but I brought a cheap donor car and plans have been altered accordingly.
    Still just picking off everything that I don't intend to use.

    Front factory tow points 0.8kg
    Carbon canister 0.9kg

  9. #21
    any plans for the power windows? mirrors are easy, i wonder what the window motors weigh? thoughts on manual conversion and estimated weight saving?

  10. #22
    I'll definitely have to look into the mirrors. Not sure about the windows, manual windows are a pain with roll cage bars.

  11. #23
    Great thread, when i start my ED project i can print out your list and count the kilos coming off as i throw shit in the bin..

    What is a fully stripped EG compared to ED weigh? anyone got rough figures?

  12. #24
    I'd guess the eg would be only 30-50kg heavier stripped.

    Front inner guards 1.4kg
    Horn 0.3kg
    Window washer bottle (half full) 1.8kg
    Rear guard lip protectors 0.3kg
    Upper Steering Column shroud + coin tray + Fuse cover (under steering wheel) 0.4kg
    Glove Box 0.8kg
    A/C Box behind dash 3.1kg
    Vent fan box 2.4kg
    Heater core vent ducts and box 4.3kg
    Rubber deadner behind dash of firewall 3.1kg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.