Hey guys,

So ive felt for the last 3 years ive been driving the CL9 that it feels really big to me. Im a short/small guy and found that the CL9 is quite hard to see out of..Needless to say ive gashed my front leftside rim pretty badly before, and bumped the drivers side rear bumper twice, cracking the paint. Fortunately no damage to the metalwork, but the reverse sensors was too slow in picking up the location of the pole, and the pole itself was really close to the curb. The pole was located in my blind spot pretty much obscured by the drivers side rear pillar.

So ive decided to install a reversing camera, plan to put this small 4.3" LCD in the centre console compartment, and wire it in the extension video coaxial cable all the way to the boot. Total cost was $35, decided it was worth the effort.

Is anyone able to tell me how i might thread this wire underneath toward the centre console?

Ive installed one of those aux/ipod adaptors to the headunit before, so i know how to take the box out. But im not too sure how to best run that video wire. Does anyone also know how best to power the LCD? Is there some adaptor i can get for the cig lighter so i dont have to splice any wires?

The ordered parts from ebay:

Camera -

http://www.ebay.com.au/itm/CAR-REAR-...60666663920%26

4.3" Screen -
http://www.ebay.com.au/itm/4-3-Inch-...50774618537%26