Page 1 of 2 12 LastLast
Results 1 to 12 of 18
  1. #1

    Vibrations in steering wheel and steering unaligned after changing wheels

    Hey guys

    Just put some random wheels on ek but after i swaped the new wheels on i realised the steering wheel has become unaligned when its in the middle it bends to the right i have to keep it a little left to keep straight. Also above 50km the steering wheels vibrates and gets worse as i go faster. I was thinking wheel alignment or bad lugs nuts was the problem and planning to give that a go first but someone may have the answer.

    Thanks in advance

  2. #2
    Member Array
    Join Date
    Oct 2004
    Location
    www.alibaba.com
    Car:
    porsche boxster
    Balance the wheels

    make sure seated properly

  3. #3
    Member Array
    Join Date
    Oct 2011
    Location
    16 Wilkins St E Annerley
    Car:
    Toyota Soarer
    maybe uneven wear on the tyres

    sounds like you might of got erens tyres from too many handbrakeys
    Users I've upset: EKVTIR-T | Renaissance_x | Integra-GSi | Stevil | vteckiller | dyln_bxtr | zedries | joyride | eren | Brian FD2R | AusS2000 | amant02 - II | CRXDEL501 | Indie | UiK | mnc | neut

  4. #4
    Member Array
    Join Date
    Feb 2010
    Location
    Melbourne
    Car:
    Racecar
    Balance wheels
    Are the tyres all the same tread pattern?

  5. #5
    Member Array
    Join Date
    Aug 2012
    Location
    Planet Earth
    Car:
    RB1 & GTR33V
    Are the wheels PCD diameter suited to fit your hubs? did u use any hub centric rings?

    like these?



    RB1-ODC

  6. #6
    Member Array
    Join Date
    Oct 2004
    Location
    www.alibaba.com
    Car:
    porsche boxster
    good finking RK ^

  7. #7
    Member Array
    Join Date
    Aug 2012
    Location
    Planet Earth
    Car:
    RB1 & GTR33V
    Or this m8s


    RB1-ODC

  8. #8
    Member Array
    Join Date
    Oct 2004
    Location
    www.alibaba.com
    Car:
    porsche boxster

  9. #9
    Member Array
    Join Date
    Oct 2011
    Location
    16 Wilkins St E Annerley
    Car:
    Toyota Soarer
    Users I've upset: EKVTIR-T | Renaissance_x | Integra-GSi | Stevil | vteckiller | dyln_bxtr | zedries | joyride | eren | Brian FD2R | AusS2000 | amant02 - II | CRXDEL501 | Indie | UiK | mnc | neut

  10. #10
    Member Array
    Join Date
    Aug 2012
    Location
    Planet Earth
    Car:
    RB1 & GTR33V
    RB1-ODC

  11. #11
    the wheels did come with hub centric ring but i havent used any
    will try and see

  12. #12
    Member Array
    Join Date
    Oct 2006
    Location
    Hunter Valley NSW
    Car:
    lownslowsedan
    shouldnt need hubcentric ring.

    rims will centre when you torque nuts up.
    to see all of my build, checkout


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.