Results 1 to 3 of 3
  1. #1

    Under-dash fuse box connectors -- I give up

    OK I give up

    Where, in the Jazz/Fit Shop Manual on CD, is the diagram of the under-dash fuse box with all the connectors labelled? (not the fuses...)

    Would like to splice something into the 12V permanent supply for the radio memory, but cant be bothered pulling the centre console out (along wth glovebox, ventilation switches, ventilation mechanical linkages, etc etc)... so knowing which connector is the radio harness would make my day

    Thx

  2. #2
    Member Array
    Join Date
    Aug 2012
    Location
    Planet Earth
    Car:
    RB1 & GTR33V
    Just use the 12v direct supply from the IGN Batt source. Just remove the under steering column cover and trace the thick wires leading to the IGN barrel.
    RB1-ODC

  3. #3
    I found a better idea, a fuse tap...

    $8 delivered from ebay.
    http://www.ebay.com.au/itm/2x-Blade-...-/160993233161
    The fuse holder on the top left of my fusebox was empty, (but live) so I plugged the fuse tap in there.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.