Mounting thermo fan on front of radiator

[mocchi]

[crobaa]

I said plenty of people run a front mounted fan without a problem, not integra specific. Funnily enough you are the only person who had the correct answer I was looking for with actual real world experience but you neglected to help out and instead just piss my off as per usual.

Also, spoon leads are about $150 additional over oem leads, genuine bisi header is known to crack and costs $1200 over the rep

[cbauto]

Ok Billy, good luck with your build

[crobaa]

Just stop posting in my threads unless your going to be helpful

[cbauto]

Just stop posting in my threads unless your going to be helpful

This is a public forum for all to use and share. As long as I follow forum rules and guidelines, I have every right to post in any thread iCal wish.

Have a nice day.

[cbauto]

When sharing with the public, you need to put up with both praise and criticism.

[cbauto]

Generally a question mark means it's a question. You could have mentioned that you'd be using a fan in front from the start.

Is your car a audm front dc2r?
Does it have half size or full size rad?
What size fan?

I got a 12" fan, pretty much covers the entire half size rad. Think it will suffice on the front? Also taking into account mods on my new motor

- Audm front
- full size koyo
- 12" Davies Craig header side push config.

[Vvvtec]

Why pushing instead of pulling if its on the header side baz?

[cbauto]

I dunno, depends on perspective.

Pushing into radiator

[stndrd]

If it is pushing from the exhaust side, it will be taking hot air from the engine bay and pushing it into the radiator, where you should be pulling air out of the radiator into the engine bay

[crobaa]

Who has pushing from exhaust side lol. I want pushing from the front

[cbauto]

- Audm front
- full size koyo
- 12" Davies Craig header side push config.

I mean header side, left side of full size radiator.

Sorry for confusion.