JDM B18C Swap won't start up

[Monetz]

ok so there is no immobiliser


you need to test
1. fuel pressure
2. injector pulse
3. spark

i check it still won't start up

1. fuel pressure working
2. injector pulse how to check it?
3. spark working

[ECU-MAN]

http://www.ozhonda.com/forum/showthr...Fuel-Injectors

see Pulse Width Test or Duty Test

[Monetz]

http://www.ozhonda.com/forum/showthr...Fuel-Injectors

see Pulse Width Test or Duty Test

i check today all 4 of them 10 ohms but check it again tomorrow

[ECU-MAN]

The important test was Duty and Pusle Width test, Resistance test will not tell you why its not starting.

[Monetz]

fu** finally i found the problem that can't start the car, that is because of i use dc2r steering column and
ign barrel key set from AUDM DC2R!!!!!!!!!! need to rewiring ign blown plug yellow/black/white to the fuse box THANK YOU FOR HELP EVERYONE.

[GaryProtune]

So did you just send power to the yellow black and white wires?