Cheers, yeah there is obviously only so many RHD EFs still in existence.
LHD version would be cool, but near impossible to design without an actual car for the R&D. I also think it would be a lot harder to fit, because the CMC would be squashed between the firewall and the strut tower on LHD car
put it out there
im sure there would definitely be interested people in the states, maybe they'll sponsor you, never know!
Hey mark I have a question.. Do we have to use the s2k cmc or blox? Would a wilwood cmc work? Reason I ask if because I already have a wilwood brake master cylinder and the s2k/blox one would look completely different style..
Hey mark I have a question.. Do we have to use the s2k cmc or blox? Would a wilwood cmc work? Reason I ask if because I already have a wilwood brake master cylinder and the s2k/blox one would look completely different style..
The Blox CMC is a just an aftermarket replacement for the OEM part, so yes it will also work.
A Wilwood CMC won't work, if you have a look at them the bolt pattern is completely different and won't interface with the machined spacers.
Hey mark quick question.. Do I have the cut the bracket on the inside to install the pedal? I see a piece getting in the way of the golden bracket you sent me.. I don't see instructions
Hey mark quick question.. Do I have the cut the bracket on the inside to install the pedal? I see a piece getting in the way of the golden bracket you sent me.. I don't see instructions
Hey Hialeahzbg, I emailed the instructions to Andre a few weeks ago. If he hasn't provided them to you PM me your email and I'll send through a PDF.
Are you referring to the small hanger that the heater box bolts to? If you are, then yes, you need to trim a very small portion off the bottom (probably around 10mm). This is included in the instructions at Step 8.
Originally Posted by grifty
Reply With Quote
Bookmarks