Results 1 to 5 of 5
  1. #1
    Member Array
    Join Date
    Jul 2011
    Location
    Rockingham, WA
    Car:
    MY11 Odyssey Lu

    2011 Ody Lux under bonnet fuse help please

    I'm intending to install some drl's but the controller needs to be connected to an "ACC" active fuse in the under bonnet fuse box.

    I'm handy with wiring etc but if anyone can point me to which fuse would be the best to use I would appreciate it.

    Cheers :-)

    Here are the relevant pages from the manual.

    Click image for larger version. 

Name:	scan0002a.jpg 
Views:	102 
Size:	186.4 KB 
ID:	28515

  2. #2
    Member Array
    Join Date
    Jul 2012
    Location
    Busselton, WA
    Car:
    DECF28R & JB627
    I would use a separate circuit with dedicated fuse.
    SSpamily

  3. #3
    Member Array
    Join Date
    Jul 2011
    Location
    Rockingham, WA
    Car:
    MY11 Odyssey Lu
    The drl controller is already separately fused, I'm just not sure which fuse under the bonnet is ACC energised. It looks like I'll just have to drag out my test light.

  4. #4
    Newcomer Array
    Join Date
    Nov 2014
    Location
    Good Coast
    Car:
    Rb3 odyssey
    I used the 12v signal from the alternator on my odyssey and my jazz. picked up at the alternator plug, blue wire i think it was.

  5. #5
    Member Array
    Join Date
    Jul 2011
    Location
    Rockingham, WA
    Car:
    MY11 Odyssey Lu
    Quote Originally Posted by Stupes View Post
    I used the 12v signal from the alternator on my odyssey and my jazz. picked up at the alternator plug, blue wire i think it was.
    Thank you :-)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.