B16a swap vtec woes

[cbauto]

Nah I didn't, just checked my gbox and the sensor is still in there - electric one - with its harness and plug. Obviously it appears as though my d16 cluster doesn't have the other end to connect.

So potentially cbauto's solution could work?

One last dumb question, the cable connects to the speed sensor which I replace with my electronic one and then continue to use my existing tacho cable?

you have y1 gearbox correct?

you have stock ed9 cluster correct?

buy my speed sensor and cable. will plug directly to your cluster

or buy speed sensor, cable and cluster for 8500 redline.

there is no taco cable.

just plug in the harnesses and should work.

your taco working atm?

[alexzachary88]

Correct and correct

Tacho work fine currently, ill pm you

Apreciate your help all

[cbauto]

I think this will apply to you soon.

http://www.ozhonda.com/forum/showthr...e-88-CRX-Cable

[caljones]

is the ecu modified? isnt p28 SOHC vtec?

[alexzachary88]

Sorry correction p30 from the eg. Yeah ive also got a new map in it in preparation for the t3/4 that's going to be installed once I get the iacv and vtec operating correctly

[cbauto]

is the ecu modified? isnt p28 SOHC vtec?

What's different single cam vtec and double cam vtec when it's ecu related?

[caljones]

What's different single cam vtec and double cam vtec when it's ecu related?

in stock form completely different map, tune, rev limit etc. It might run but not very well.

[ECU-MAN]

Noticeable power loss with P28 maps on a B16A engine.