Gen 2 Crx b16a turbo project

[Snoop_gee]

Snnop - do you know if the rad in the exmaple above is from a specific car or custom made?

the rad setup is a custom made item

btw which state and suburb do u live ?

[alexzachary88]

Dandenong north in vic

[alexzachary88]

Heading to the mg club hill climb this sunday to try out the new engine.... cant wait

[cbauto]

Got weetek working?

[Snoop_gee]

Currently have a log manifold, but have noticed that most setups are usong the rams horn type... looks like they position the turbo further down, will need to rethink that

The better style manifold has equal runners and support the weight of the turbo without cracking.
The flow on the log is not good as the ram.
Definitely look into it further man.

Dandenong north in vic

reason i asked is the radiator was made by these guys xcellent service and product.

Race Radiators
59 Bennet St, Dandenong VIC 3175
(03) 9793 2798

Heading to the mg club hill climb this sunday to try out the new engine.... cant wait

Sound interesting ... looking foward to seeing some pics.

[alexzachary88]

Have some time on Saturday, will be putting in a 4 piece brace kit and then see if I have time to swap in the new speedo drive and cluster i got off you

[alexzachary88]

Actually my list of things to do before I start the turbo install are:

New iacv
Get vtec working
Install brace kit
New discs and pads
Tidy up the engine wiring - is still a bit rough after the engine swap
Replace/alter the throttle cable as it's a bit sticky

[alexzachary88]

Heading there with my mate who has a 2003 m3, will take some photos and post up

[grifty]

Just realised Skunk 2 make a half rad that fits perfect on the ED/EF, you should check it out.

[alexzachary88]

Hmmm just looked it up, price is really reasonable too... thanks

[cbauto]

Just realised Skunk 2 make a half rad that fits perfect on the ED/EF, you should check it out.

Does it fit either side?

[IEVAQ8]

jeffs crx was a very nice and clean sleeper back in the day...
awesome work by the guys at revzone for that car..

maybe give them a buz or have a chat to craig down there, they in ringwood