Results 1 to 2 of 2
  1. #1

    Removing the front bumper 09 GE jazz

    I'm replacing the headlamps because a cockatoo decided to commit suicide and take a nosedive straight to it.

    I need to remove the front bumper but the bottom clips are difficult to remove and I tried pulling it out from the side but seems to be really fit in there.

    Any help? Should I just take it to a professional instead of DIY. I'm likely to break the clips or the tabs that hold the bumper in place which would it make more costly.
    Last edited by rubyjazz; 06-10-2014 at 08:22 AM.

  2. #2
    Member Array
    Join Date
    Mar 2005
    Location
    Hobart
    Car:
    03 gli 325000ks
    dont take it to a pro, you should be able to have the bar off in 5 mins flat.

    clips underneath and under bonnet near grille, use a thin flat screwdriver to pop the centre up, and there is a small philips head screw just in front of each front wheel, and another clip above if i remember right.

    its really easy.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.