sounds like the ECU does not want to engage VTS


is the ROM in the ECU stock ?


did you ground the other side of the test lamp for the VTS test ?


any DTC's in the ECU memory ?


You need to test the VSS, TPS, MAP and ECT signal at the ECU connectors.


you need to do voltage tests for ECT, TPS and MAP with a warm engine and frequency for VSS as described in the below links.




http://www.ozhonda.com/forum/showthr...cs-Code-17-VSS


http://www.ozhonda.com/forum/showthr...ics-Code-7-TPS


http://www.ozhonda.com/forum/showthr...ics-Code-5-MAP


http://www.ozhonda.com/forum/showthr...ics-Code-6-ECT