Go and find the ecu it should be located in the passenger footweel compartment and will have it's part number on it
Are you looking to replace it?
The 5th gen accord VTEC Auto ecu part number was **** POA **** - look for the middle three letters/number to distinguish yours
Or take it to a wrekcer to get matched up
You've gone through more accords than I changed underwear this month! - Sugz
Go and find the ecu it should be located in the passenger footweel compartment and will have it's part number on it
Are you looking to replace it?
The 5th gen accord VTEC Auto ecu part number was **** POA **** - look for the middle three letters/number to distinguish yours
Or take it to a wrekcer to get matched up
I need the 6th gen accord. They came with either F23 or the V6. Manual was an option.
Need the F23a Manual ecu OBD2a...
i am doing a F23a manual conversion to an odd car.. hence need an ecu for it.
According to some source the ECU for the USA accords is ***** PAA ***
Wether or not this equals ours - i don't know
I'm sure with ECU-MANS help you can convert the auto ECU to a Manual one
You've gone through more accords than I changed underwear this month! - Sugz
to spill the beans... I am trying to convert an RA3 Odyssey which only came in Auto. ECU for that is PEA-Q50.
Because it was only ever auto there is no equivalent manual ECU variant.
It has a F23A OBD2A. All 5th Gen Accords are F22 and OBD1. 6th Gen accords came in F23a OBD2A (PAA-L10 i believe) and OBD2B (PAA-L11 I believe).
There are a few other cars in Japan that came with F23a.. CF6 and TA1 from research.. seems TA1 was only auto though..
These are just my findings so far.
I gotta goto honda for a rear main seal, might see if i can get the code from the EPC. But input is appreciated.
to spill the beans... I am trying to convert an RA3 Odyssey which only came in Auto. ECU for that is PEA-Q50.
Because it was only ever auto there is no equivalent manual ECU variant.
It has a F23A OBD2A. All 5th Gen Accords are F22 and OBD1. 6th Gen accords came in F23a OBD2A (PAA-L10 i believe) and OBD2B (PAA-L11 I believe).
There are a few other cars in Japan that came with F23a.. CF6 and TA1 from research.. seems TA1 was only auto though..
These are just my findings so far.
I gotta goto honda for a rear main seal, might see if i can get the code from the EPC. But input is appreciated.
Whoa sounds like a nice project
The facelift 5th gen accord did come with OBDII
I think you can change your ecu to a manual be desoldering a few things on the cirucuit board and wiring in the neuteral safety switch
No need for new ecu
I'm sure ECU MAN will know more
As i've been researching an auto to manual swap too
You've gone through more accords than I changed underwear this month! - Sugz
Whoa sounds like a nice project
The facelift 5th gen accord did come with OBDII
I think you can change your ecu to a manual be desoldering a few things on the cirucuit board and wiring in the neuteral safety switch
No need for new ecu
I'm sure ECU MAN will know more
As i've been researching an auto to manual swap too
cheers dude. If I pull off the conversion I will do a write up.
I am chatting to ECU-MAN about it now - i didnt think OBD2a Auto ecu's could be converted, but he would know better than I thats for sure.
Originally Posted by ECU-MAN
Bookmarks