EK suspension fit EG civic ?

**teaseR** · 16-03-2015 08:55 PM

Sup guys just brought a eg and my mate got ek suspension with lowered spring. Will it bolt on or do i have to do mods for it to fit ?

Cheers guys

**kevinnguyens** · 16-03-2015 09:38 PM

couple of threads on here but if im not mistaken the front is same and the rear is dependant on the LCA

**Hondarally** · 17-03-2015 06:06 AM

Yup.

Swap yokes over on the front and it will bolt in (ie put your yokes on the EK units). Rear will need different LCA's to fit.

**teaseR** · 17-03-2015 07:55 PM

Cheers guys
Want LCA's do i need to get ?

**2MPRS** · 18-03-2015 08:53 PM

keep your lcas get the grinder out and grind the middle bushing for the tightass way. or buy press in an ek center bushing on the lca

**kevinnguyens** · 18-03-2015 10:59 PM

or just buy ek lca. they go for dirt cheap anyways save you the hassle of screwing up or pressing new bushings in given the ones on the lca are fine

**mocchi** · 19-03-2015 08:36 AM

Originally Posted by kevinnguyens

or just buy ek lca.

no.

wrong length.

negged.

**u mad?** · 19-03-2015 08:41 AM

Originally Posted by mocchi

no.

wrong length.

negged.

x2 negged for giving life threatening advice

hope op hasn't followed it

this is the type of advice that puts people in hospital, or worse yet..........underground

**kevinnguyens** · 19-03-2015 12:31 PM

ahh soz guys was under the impression that the bushings were the difference

**teaseR** · 19-03-2015 04:27 PM

Cheers again guys.

So just buy ome EG LCA and they fit onto the Ek suspension ?

**teaseR** · 19-03-2015 04:28 PM

Yea mayb not grind it got 2 young kids in the car

**Hondarally** · 19-03-2015 04:37 PM

Edit: Apparently the photo below is a DC2R (tho that's the type I have fitted on my EG6). EG LCA's are geometrically the same, so the length is wrong for installation into EK, or vice versa. EK LCA shown on the Bottom

Edited and removed other photos to avoid confusion