Hey all, I am very confused as to why my vtec doesn't kick like it should. I only can hear the secondaries at 6000 rpm but there is nothing before that. I have flushed the oil and am currently using 15-40 Penrite oil. The oil levels are where they should be so there isn't a problem there. This led me to believe that it was the solenoid gaskets as the vtec solenoid gasket was leaking so I replaced them. Still no go. The car also has a VAFC1 vtec controller from the previous owner so I reset that to factory settings just in case it may have had something to do with it, still nothing. I tried unplugging it but then my car ran terribly and got a check engine light. ANY help is much appreciated, I'm stumped. Thanks for your time!