-
-
Yes, the S2K caliper (16CL16VN) and DBA 2500 rotor (EP3R, DC5R etc, NON Brembo) will fit with a 3mm spacer under the rotor. Note that this will mean that the centre bore of the rotor won't engage on the hub spigot, so you need to ensure that you get the rotor perfectly centrerd. If you drill the rotor accurately enough, you can use the original locating screws to centralise the rotor.
The other option, as you say, is to machine 3mm off the caliper mount.
Can't confirm that the S2K calipers are the same as others, but you can cross reference the numbers above.
It will fit under 6UL 15" wheels (just) and a couple of others, but 16" wheels is a much safer option.
Lastly: do you NEED 300mm rotors? The 282mm rotors will give you plenty of braking, even for the race track. If you're running a turbo K swap, then maybe 300mm is needed, but anything less you're probably wasting $$
-
Last edited by JordanMugen; 08-04-2015 at 11:05 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks