Has anyone used TODA headers on a B16A?

**Blaze** · 31-05-2015 11:20 AM

Has anyone used any of the TODA headers on a B16A? The only ones on their website are the B18CR and B16BR headers. The ITR ones come in a 98 spec and a 96 spec (not sure what the difference is, technically speaking). I'm also considering a set of Spoon headers for the same engine but I've been told by the guys at Gaijin-garage that they'll hang low on the B16A. Would the TODA ones have the same issue?

Are there any other headers out there specifically for the B16A? I've found a set by Fujitsubo ( http://www.fujitsubo.co.jp/prods/det...02670/00000156 ) but I've been told that they are an older two-piece design which is more restrictive than a one-piece header. They are the only set I've found for the B16A so any help would be appreciated.

**90LAN** · 31-05-2015 06:42 PM

toda header will work on your b16 other than been a good header it has a 2.5" outlet

**Blaze** · 31-05-2015 11:22 PM

So I asked the guys at perfect run for a price on the Toda headers and which headers would be required for my engine and this is the reply I got:

Hi Blaze,

Thank you for your enquiry, but Toda Racing exhaust manifold is not available for EG2 CR-X unfortunately.

Regards,

Taki

Perfect Run

sales@perfectrun.com.au

**Blaze** · 31-05-2015 11:24 PM

Not sure if they don't stock/cant get them in or whether the sales guys don't know whether they are compatible.

**e240** · 31-05-2015 11:29 PM

Why don't you reach out to the local toda agent?

Toda headers are very good and looks sweet too

**Blaze** · 31-05-2015 11:35 PM

Originally Posted by e240

Why don't you reach out to the local toda agent?

Toda headers are very good and looks sweet too

There's a local Toda agent?

**90LAN** · 01-06-2015 04:27 PM

A 96 spec b18c header will fit your engine
A 98 spec toda headers just needs a 98 spec exhaust manifold bracket
Or you can fit with out it

**Blaze** · 01-06-2015 04:38 PM

Originally Posted by 90LAN

A 96 spec b18c header will fit your engine
A 98 spec toda headers just needs a 98 spec exhaust manifold bracket
Or you can fit with out it

Thanks heaps! At lease I know which one of the 3 headers I should be comparing with the Spoon set.

**DreadAngel** · 01-06-2015 06:16 PM

PM sent mate

**e240** · 01-06-2015 10:20 PM

Originally Posted by Blaze

There's a local Toda agent?

yes there is. pm slaz

**roy8532** · 12-06-2015 10:53 PM

Toda is one of the best I say.

**limiteR** · 21-06-2015 02:36 PM

I used to run a toda v2 4-2-1 on me B16a2 EM1.

Feel free to check my old build thread to see results and thoughts on it

But it does cost an arm to order.