DC2 VTi-R SA

[Alex_Walker]

Hey guys, this is my 95 DC2 VTi-R. Have owned it for roughly a year now.




That was taken before I swapped wheels. I previously had Volk Racing CV Pro's 16x8 +35 4x100 and now have Rota Slipstream 16x7 +38 4x100. Yes, I have somewhat 'downgraded' in terms of wheels, however I had many issues with one of my Volk rims as it had been previously cracked and re-welded. From when I purchased the car it spent a lot of time sitting around without a wheel as it was always being repaired... Ended up being unrepairable as it wouldn't hold air, so purchased new set of rims and happy with how it currently looks



Current Modifications

King Springs
Hardrace rear camber kit
Skunk2 front camber kit
OBX rear subframe + 24mm swaybar with ASR endlinks
Strut bars front + rear
Short ram air intake
DC Sports header + XForce exhaust
Quaife LSD

Upcoming Modifications

Brakes - Probably RDA rotors for front and rear. Just the standard blank rotors. However, with decent brake pads just unsure what to get at the moment.

Doing the odd hillclimb and hopefully get to some track days in the near future

Cheers for reading!

[JordanMugen]

Nice car Alex!

[SHOGUNOVDDRK]

Hello, Welcome to OzHonda Alex.

I rather liked the Volk's but the slips do go with your colour.

Keep posting and keep us posted on what you get up to on the car!

[Alex_Walker]

Spent the day out at Collingrove hillclimb. Few scrubbing issues on the front right which you can hear from the video :S Need to raise the front of the car up slightly and all will be good!
Here's a video of my fastest run of the day.
https://www.youtube.com/watch?v=9GbeBCxRFWQ