-
-
you are missing your front lower torque mount. It is rubber encapsulated in a C shaped metal enclosure and is held via that large bolt and a large nut. You can get a new one , or change your side and rear engine mounts to heavy duty hasport/innovative or similar and not worry.
Did is this car get built by BYP ?
-
(http://www.lingshondaparts.com/honda...9&block_05=hcr)
From this diagram, you are missing part number:
18, the lower torque mount.
30, x2 bolts.
44, washer.
42, nut.
You can also get these parts off a wrecking EK Civic, CRX Del Sol, DC2/4 Integra and I've did a quick Google and first gen CRV too.
Is the other side's torque mount there?
Last edited by 3K9; 07-01-2016 at 03:50 AM.
-
Where are you located? I had a guy drop off a Red EG with b16 with a yellow valve cover saying it just needed "minor wiring" when I noted the dash was missing and all looms where cut the owner didn't liked the resulting quote...
-
-
Hey mate I'm on the gold Coast and have some spare ek1 and ek4 engine mounts. I might have a brand new mount that you're missing as well. Welcome to swing by for a look see if you like. I think I also have a ek4 o2 sensor (b16a2). Let me know.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks