CTR b16b camshafts

[babybashjnr]

I would recommend going for a close ratio gearbox before starting engine mods

[Vvvtec]

Does anyone know if you can still find the OEM Honda CTR camshafts, valve springs and cam gears in new condition.

Other than a new ECU and tune, is there anything else that I would need to run these in my B16A?

save ur dollars m8 get sussy and tyres

[Blaze]

save ur dollars m8 get sussy and tyres

Wheels and tyres have been sorted...just need suspension.

Wheels are RPF1 15x7 +41 tyres are khumo Ku36 205/50

[Vvvtec]

Wheels and tyres have been sorted...just need suspension.

Wheels are RPF1 15x7 +41 tyres are khumo Ku36 205/50

joocy

u got lsd?

[Blaze]

I tried decoding my VIN number to see whether it had an LSD but I don't think it does.

[Vvvtec]

being a del sol it won't

[Daveho1]

Agreed with the above, sort suspension befor looking for power, most likely you will reach your limit before the car dose

[dougie_504]

If you want a fun/zippy daily get an ITR GBox. Alternatively put a 4.9 FD, longer 5th gear and a helical LSD into your GBox. Shorter gears and an LSD are the best mods I ever did to my own car.

Otherwise great mods are sway bars and good brakes and tyres.

If you want to do cams I suggest you run staggered profiles, also from my own tuning experience, with the bigger cam on the intake side for the standard B16 given it's compression ratio + displacement. It helps to keep the cylinder head pressure up and create dynamic compression.

[Austro]

CTR cams = 00-01 DC2R cams. You will also need the associated valve springs for at least the intake side. Cam gears will be the same, valve springs will be different.

Sets come up for sale on YAJ fairly frequently.